HPI HPI10706
$179.97

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.RTR E10 Ford Mustang GTR
This is the 1/10 scale electric powered, radio controlled, ready to run
HPI F0RD Mustang GT-R Touring Car.
Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF-
1 steering servo
Electronic Speed Control: EN-1 with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC 120V wall type
Battery: 7.2V 1500mAh 6-cell stick pack with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: T-Grip 2.48" (63mm) diameter, 1.02" (26mm) wide
Wheels: Six spoke, chrome Gram Lights 57S-Pro
2.08" (53mm) diameter, 1.02" (26mm) wide
Bumpers: Front, foam
Body: Pre-painted F0RD Mustang GT-R body, adjustable body
mounts to accomodate a large variety of touring car bodies
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
HPI E10 on-road F0RD Mustang GT-R Touring Car with painted
body, radio, ESC, battery, charger, wheels, tires, 27T motor
and manual _
Radio Batteries: (8) AA size
Misc. Items: Building and track equipment
VEHICLE-
Length: 14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
Height: 5.25" (133.35mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10" (255mm)
Drive Ratio: 7.48:1
Tread: Front- 6.5" (165mm) (side-to-side at wheel centers)
Rear - 6.8" (173mm)
Front Track: 7.5" (190mm)
Rear Track: 7.75" (197mm)
Spur Gear: 65T
Tires- Front and Rear: 2.48" x 1.02" (63x26mm)
BODY-
Length: 17" (431.8mm)
Width: 8" (203.2mm) at rear wheels (widest point)
7.75" (196.85mm) behind from wheels (thinnest point)
Height: 5.5" (139.7mm)
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
2 12x18x4 Center drive shaft DTXC1597 1
Body pictured on the box is painted red
For the assembled version without battery or radio, order HPIC2764.
jxs 10/02/07
tlw 10/04/07
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: