HPI HPI107020

This is the glow powered, 2.4GHz radio controlled, ready to run 1/8 scale Pulse 4.6 Buggy Racer from HPI. Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear rod braces Drive: Four wheel shaft, with steel outdrives and axles Engine: HPI Nitro Star K4.6 HO .28 cu in, 2.9hp, pull starter two-stage air filter with splash guard to prevent engine from getting flooded with water in wet conditions, composite 2-needle carb, ABC construction, large heatsink for efficient heat dissipation, upgradable to the Roto Start 2 for easy push button starting (Roto Start 2 not included, order HPIP7130) Radio: 3-channel 2.4GHz with end point adjustment, servo reversing, steering dual rate, failsafe and high-torque metal gear steering servo Radio Tray: Low profile aluminum Fuel Tank: 5.4oz (125cc) Differentials: Bevel Gear type, silicone oil filled Shocks: Oil-filled, 15mm diameter large bore Shock Towers: Front, 7075 aluminum, rear 6061 aluminum Brake: Dual drilled steel discs with fiber brake pads Suspension: Assembled with steel hex head screws with locknuts, extra strong suspension arms, 2.5mm front swaybar and 3mm rear swaybar Clutch: Three shoe, 14T steel clutch bell Steering: Bellcrank type with 6061 aluminum steering link with three adjustment holes Ball Bearings: Full set, rubber sealed Body: Painted and trimmed buggy body with white molded rear wing Bumpers: Front plastic Wheels: Turbine design, white in color with 17mm hexes Tires: Soft compound mini-pin Trekker tires with foam inserts Ball Bearings: Full set Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Ackerman: Adjustable, Ackerman refers to the effect of the inside front wheel rotating faster than the outside front wheels during turns Warranty: Two year limited, valid only in the USA, Canada and South America RTR 1/8 scale Pulse Buggy Racer, .28 cu in Engine w/Pull Starter Body, Decals, 3-channel 2.4GHz Radio, eight AA Batteries and Instructions Glow Fuel: Car blend with 10-20% nitro content Glow starter, fuel bottle, building and track equipment Vehicle- Length: 18.7" (475mm) including wing Width: 11.8" (300mm) Height: 6.1" (155mm) Weight: 7.3lbs (3300g) Body- Length: 13.4" (342mm) Width: 7.7" (196mm) Height: 4" (102mm) For replacement ball bearings use: Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Diff 1 DTXC1581 2 8x12mm Ctr Diff 1 DTXC1581 2 8x12mm Rear Diff 1 DTXC1581 2 8x12mm Fr Gearbox 1 DTXC1581 2 8x12mm Rear Gearbox 1 DTXC1581 2 8x12mm Fr Hubs 1 DTXC1581 2 8x12mm Rear Hubs 1 DTXC1581 2 5x10mm Clutch 1 DTXC1535 jxs 09/22/11 ir/jxs &