HPI HPI106949

$488.88
HPI logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
RTR WR8 3.0 Ford Fiesta Rally Abu Dhabi Castrol
HPI HPI106949 - RTR WR8 3.0 Ford Fiesta Rally Abu Dhabi Castrol

This is the Glow Powered, 2.4GHz Radio Controlled, 1/8 Scale, Ready to Run
WR8 3.0 Rally Car from HPI.
FEATURES:
Chassis: 0.12" (3mm) thick natural finish aluminum with plastic side
guards
Drive: Four wheel shaft
Radio: HPI TF-40 3-channel 2.4GHz with dual rate steering, all
channel servo reverse and waterproof analog servo
Engine: HPI Nitro Star 3.0 with pull starter, slide valve carburetor
steel flywheel, foam air filter, and 2-shoe racing type clutch
Exhaust: Aluminum tuned pipe
Fuel Tank: 2.5oz (75cc)
Differentials: Three, bevel gear type
Shocks: Oil-filled, composite body with rear shock mud guards
Brake: Two steel discs
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links for easy adjustment
Tires: Latitude Cross S1 gravel tires officially licensed by
Michelin 1.24" (31.5mm) wide, 3.2" (82mm) diameter with Foam
Inserts
Wheels: White plastic 1.25" (33mm) wide, 1.9" (48mm) diameter, 12mm
hex size
Ball Bearings: Full set
Body: Trimmed and painted white with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America
YOU WILL RECEIVE:
HPI RTR WR8 3.0 Rally Car with 2.4GHz Radio, Steering Servo, Engine,
8.4oz (250ml) Fuel Bottle, Eight AA Batteries, C-Battery, C-size
Glow Starter, Painted Body and Instruction Manual
REQUIREMENTS:
Glow Fuel: car blend with 20-25% nitro content
Filter Oil, Flat Blade Screwdriver, Track and Maintenance Equipment
SPECIFICATIONS:
Vehicle-
length: 19.1" (485mm)
width: 8.9" (227mm)
height: 6.8" (172mm)
Wheelbase: 11.8" (300mm)
Body-
length: 18.9" (480mm)
width: 8" (203mm) behind front wheels, narrowest point
9.1" (232mm) at rear wheels, widest point
height: 6" (153mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
2 5x11mm Clutch 1 DTXC1547
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
jxs 06/06/12
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov