HPI HPI106546

$174.99
HPI logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
Desert Trophy Truck 4wd RTR
HPI HPI106546 - Desert Trophy Truck 4wd RTR

HPI brand radio controlled, electric powered ready-to-run, 1/12 scale
Desert Trophy Desert Truck from HPI.
FEATURES:
Chassis: Nylon tub with inner roll cage
Drive: Four wheel shaft
Radio: HPI TF-1 27MHz 2-channel pistol grip with SF-1 steering servo
Motor: HPI Firebolt 540 size, 15 turn
Electronic Speed Control: HPI SC-15 with reverse (HPIM0341)
Differential: Metal planetary gears
Spur Gear: Composite construction 87 tooth, 48 pitch
Pinion Gear: Steel construction 18 tooth, 48 pitch
Ball Bearings: Full set
Shocks: Composite body, oil-filled
Body: Three-piece painted and trimmed with race team graphics,
realistic interior with two driver figures and two non-functional
spare tires in bed of truck
Suspension: 4-wheel independent with aluminum front and rear uprights
Tires: Licensed Yokohama Geolander 1.3 (34mm) wide, 3.7 (94mm)
diameter with foam inserts
Wheels: Matte chrome finish 1 (26mm) wide, 2.2 (54mm) diameter
12mm hex
Bumpers: Front and rear skid plate type
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
Warranty: Two year limited through HPI beginning at date of purchase.
Warranty valid only in the USA, Canada and South America.
YOU WILL RECEIVE:
RTR Desert Trophy Desert Truck, 27MHz radio, steering servo, motor
ESC, body and instruction manual
REQUIREMENTS:
Battery: 6-cell nimh stick pack with Standard connector
Battery Charger: nimh compatible, peak type
AA Batteries: Eight for transmitter
SPECIFICATIONS:
Vehicle;
length: 21.12 (539mm)
width: 9 (229mm)
Wheelbase: 12.3 (312mm)
height: 6.25 (159mm)
Body;
length: 18 (457mm)
width: 6.8 (174mm) behind front wheels, narrowest point
8.3 (210mm) at front fenders, widest point
height: 5.1 (130mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Uprights 1 DTXC1595
2 5x11mm Fr Uprights 1 DTXC1547
2 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Rear Diff 1 DTXC1547
1 5x11mm Spur Gear Assembly 1 DTXC1547
1 10x15mm Spur Gear Assembly 1 DTXC1595
2 10x15mm Rear Uprights 1 DTXC1595
2 5x11mm Rear Uprights 1 DTXC1547
jxs 07/07/10
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov