HPI HPI106162

HPI brand 1/10 scale, brushless electric powered, 2.4GHz radio controlled,
RTR HPI On-Road Sprint 2 Flux Touring Car with the 2010 Camaro Body.
Chassis: 3/16 (4mm) plastic
Drive: Four wheel belt drive
Motor: HPI Flux Vektor 5900kV brushless
Radio: 3-channel HPI TF-40 2.4GHz with steering and throttle trim,
servo reversing, low battery indicator and 3-channel receiver with
failsafe, SF-10W waterproof steering servo and four AA transmitter
batteries
Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible
and fully prgrammable with the USB Programming Kit (not included,
order HPIC0573)
Battery: HPI Plazma 8.4V 3300mAh NiMh
Battery Charger: 110V wall type
Ball Bearings: Full set, rubber sealed
Shocks: Oil-filled, plastic bodied
Differentials: Planetary gear, sealed
Transmission: Single speed with Flux optimized gearing
Tires: HPI X-Pattern Racing Tire 1.02 (26mm) width, 1.9 (49mm)
diameter
Rear, 1.2 (31mm) width, 1.9 (48mm) diameter
Wheels: HPI TE37 six spoke chrome 1.9 (48mm) diameter, 1.02 (26mm)
wide
Pinion Gear: Steel 48 pitch
Spur Gear: 48 pitch, composite construction
Body: Polycarbonate painted and trimmed with body trim and light
details and clear plastic windows, matte black finish rear wing
Bumpers: Front, foam
Suspension: Fully adjustable, extra long upper links with new
multiple mounting positions, and adjustable droop
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bearing supported bell-crank type with servo saver
HPI On-Road Sprint 2 Touring Car with the 2010 Camaro Body, Flux
Vapor ESC, Flux Vektor 5900kV brushless motor, body, wing, 8.4V
NiMh battery, wall charger, 4 AA TX batteries, 2.4GHz radio w/
waterproof steering servo, decal sheet, DVD and instruction manual
Misc. Items: Building and track equipment
VEHICLE-
length: 17 (431mm)
width: 7.5 (190mm)
height: 5 (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10.1 (257mm)
Front Track: 7.4 (187mm)
Rear Track: 7.7 (196mm) side to side at outer edges of wheel
Front Tread: 6.3 (160mm)
Rear Tread: 6.6 (169mm) side-to-side at wheel centers
Ground Clearance: 0.35 (9mm)
BODY-
length: 17.1 (434mm)
width: 7.75 (197mm) at rear wheels (widest point)
6.6 (169mm) behind from wheels (thinnest point)
height: 4.4 (111mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 5x8mm Fr Diff 1 DTXC1523
2 5x8mm Rear Diff 1 DTXC1523
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 4x8mm Spur Gear Mount 1 DTXC1511
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511
Body pictured on the box is painted yellow.
jxs 09/08/11
ir/jxs