HPI HPI10553
$298.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.E-Firestorm 10t Flux RTR
HPI brand 1/10 scale radio controlled, electric powered, ready-to-run
HPI E-Firestorm 10T Flux Stadium Truck.
Many HPI Firestorm 10 option parts fit this vehicle.
Chassis: Composite nylon tub 3mm (0.12) thick
Drive: Rear wheel
Motor: HPI Flux Warp 5700Kv rebuildable brushless motor with
neodymium magnet, oversized sealed bearings, 1/8 (2.3mm) shaft,
slotless stator for smooth linear torque and is compatible with any
sensorless ESC
Electronic Speed Control: HPI Flux Motiv, ultra low resistance
sensorless, 6-7 cell nimh or 2 cell LiPo compatible
Radio: HPI TF-1 AM 27MHz with steering and throttle trim and reverse
SF-1 steering servo, transmitter does not have charge jack
Wheels: chrome finish Scorch six spoke 2.0 (51mm) wide, 2.2 (55mm)
diameter with 12mm aluminum hex adapters compatible with all HPI
1/10 scale vehicles
Front Tires: Front Line 4 (102mm) diameter, 2.1 (53mm) wide
Rear Tires: Ground assault 4 (102mm) diameter, 2.1 (53mm) wide
Transmission: Low profile 2.6:1 ratio with all metal gears
Shocks: Four silicone oil-filled composite body
Suspension: Assembled with captured hinge pins, geometry and
components from Firestorm 10
Differential: Sealed planetary type
Spur Gear: 87 tooth 48 pitch
Pinion Gear: 19 tooth 48 pitch
Body: Pre-painted and trimmed DSX-2, body color will be either red or
silver
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
with dual pad slipper clutch
Steering: Bell crank with cam-type servo saver steering arms
laydown steering servo position
Warranty Period: Two year limited
HPI Firestorm 10T Flux Stadium Truck, Flux Warp brushless motor, esc
TF-1 radio with steering servo, Front Line front tires, Ground
assault rear tires, DSX-2 painted body and instruction manual
AA Batteries: 8 for transmitter
Battery: 6- or 7-cell NiCD or nimh with Deans Ultra Female connector
or 2-cell LiPo (order WSDM1303 for Female Ultra Plug to connect to
ESC)
Battery Charger: Timed or peak for selected battery
Building and track equipment
Vehicle-
length: 16.7 (425mm)
width: 12.8 (325mm)
height: 5.8 (147mm) at rear wing
Wheelbase: 11.4 (289mm) adjustable
Body-
length: 16 (406mm)
width: 6.5 (166mm) ahead of rear wheels (widest point)
(141mm) ahead of front wheels (narrowest point)
height: 3.8 (96mm)
Thickness: 0.020 (0.5mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Transmission 1 DTXC1595
4 5x10mm Transmission 2 DTXC1535
2 5x10mm Front Hubs 1 DTXC1535
2 5x10mm Rear Hubs 1 DTXC1535
The E-Firestorm is available in the A1-A6 27MHz radio channels.
Body colors will be either silver or red. It is not possible to
request a specific body color because they are supplied by the
manufacturer at random.
HPI E-Firestorm 10T Flux Stadium Truck.
Many HPI Firestorm 10 option parts fit this vehicle.
FEATURES:
Chassis: Composite nylon tub 3mm (0.12) thick
Drive: Rear wheel
Motor: HPI Flux Warp 5700Kv rebuildable brushless motor with
neodymium magnet, oversized sealed bearings, 1/8 (2.3mm) shaft,
slotless stator for smooth linear torque and is compatible with any
sensorless ESC
Electronic Speed Control: HPI Flux Motiv, ultra low resistance
sensorless, 6-7 cell nimh or 2 cell LiPo compatible
Radio: HPI TF-1 AM 27MHz with steering and throttle trim and reverse
SF-1 steering servo, transmitter does not have charge jack
Wheels: chrome finish Scorch six spoke 2.0 (51mm) wide, 2.2 (55mm)
diameter with 12mm aluminum hex adapters compatible with all HPI
1/10 scale vehicles
Front Tires: Front Line 4 (102mm) diameter, 2.1 (53mm) wide
Rear Tires: Ground assault 4 (102mm) diameter, 2.1 (53mm) wide
Transmission: Low profile 2.6:1 ratio with all metal gears
Shocks: Four silicone oil-filled composite body
Suspension: Assembled with captured hinge pins, geometry and
components from Firestorm 10
Differential: Sealed planetary type
Spur Gear: 87 tooth 48 pitch
Pinion Gear: 19 tooth 48 pitch
Body: Pre-painted and trimmed DSX-2, body color will be either red or
silver
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
with dual pad slipper clutch
Steering: Bell crank with cam-type servo saver steering arms
laydown steering servo position
Warranty Period: Two year limited
YOU WILL RECEIVE:
HPI Firestorm 10T Flux Stadium Truck, Flux Warp brushless motor, esc
TF-1 radio with steering servo, Front Line front tires, Ground
assault rear tires, DSX-2 painted body and instruction manual
REQUIREMENTS:
AA Batteries: 8 for transmitter
Battery: 6- or 7-cell NiCD or nimh with Deans Ultra Female connector
or 2-cell LiPo (order WSDM1303 for Female Ultra Plug to connect to
ESC)
Battery Charger: Timed or peak for selected battery
Building and track equipment
SPECIFICATIONS:
Vehicle-
length: 16.7 (425mm)
width: 12.8 (325mm)
height: 5.8 (147mm) at rear wing
Wheelbase: 11.4 (289mm) adjustable
Body-
length: 16 (406mm)
width: 6.5 (166mm) ahead of rear wheels (widest point)
(141mm) ahead of front wheels (narrowest point)
height: 3.8 (96mm)
Thickness: 0.020 (0.5mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Transmission 1 DTXC1595
4 5x10mm Transmission 2 DTXC1535
2 5x10mm Front Hubs 1 DTXC1535
2 5x10mm Rear Hubs 1 DTXC1535
The E-Firestorm is available in the A1-A6 27MHz radio channels.
Body colors will be either silver or red. It is not possible to
request a specific body color because they are supplied by the
manufacturer at random.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov