HPI HPI10515

This is the radio controlled, glow powered, ready-to-run
HPI Savage XL 5.9 Monster Truck.

Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12
(3mm) thick
Drive: Four wheel shaft driven
Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and
piston construction, three needle composite bodied slide valve
carburetor with 9.5mm inlet, dual stage air filter, starts with
included HPI Roto Start 2 shaft drive electric starter, one-piece
engine mount and 0.12 (3mm) mounting plate
Exhaust: Polished aluminum two-chamber tuned pipe and polished
aluminum manifold
Radio: HPI TF-3 27MHz FM with steering and throttle trim and servo
reversing on both channels, 1200mAh nimh receiver battery and
charger, transmitter does not have charge jack
Servos: SF-1 standard servo for throttle, SF-5 high torque servo
with 8.9kg/cm2 at 6 volts
Wheels: chrome plated 2.2 (56mm) wide with 17mm aluminum hex
hubs, 3.4 (87mm) diameter
Tires: HPI Terra Pin with spike pattern for grass and loose dirt
and center chevron pattern for directional stability, 7 (178mm)
diameter, 3.35 (85mm) wide
Shocks: Eight long-stroke oil-filled
Fuel Tank: 5.4oz (160cc), flip top cap
Clutch: Three shoe aluminum
Clutch Bell: Heavy duty steel construction, vented 16 tooth
Body: Painted and trimmed 0.60 (1.5mm) thick polycarbonate GT
Gigante monster truck, body color is blue or orange see COMMENTS
Suspension: Double wishbone with lightweight suspension arms
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Brake: Machined steel hub and dual red fiberglass brake discs
Transmission: Three-speed with metal gears and adjustable shift
point
Differentials: alum cases with with machined steel rings and pinion
bevel gears with new larger machined steel diff outdrives and axles
Slipper Clutch: Heavy duty dual slipper plates and shock absorbing
rubber pad
Spur Gear: Machined steel 52 tooth
Ball Bearings: Full set, rubber sealed
Steering: Bell crank with cam-type servo saver steering arms
Warranty Period: Two year limited, valid only in the US, Canada and
South America

HPI Savage XL 5.9 Monster Truck with HPI Nitro Star K5.9 engine,
Roto Start electric starter, glow plug, air filter, 2-channel
radio, standard throttle servo, high-torque steering servo, hump
receiver pack, wall charger, painted and trimmed body, instruction
manual

AA Batteries: Eight for transmitter
Fuel: Car blend with 20% nitro content
Battery: 7.2V stick pack with standard connector for Roto Start
Battery Charger: Timed or peak for Roto Start battery
Glow starter, fuel bottle and track equipment

Vehicle-
length: 23.8 (580mm)
width: 17.5 (445mm)
height: 10.6 (270mm)
Wheelbase: 15.74 (400mm) wheels on-center front-to-rear
Suspension Travel: 6 (152mm)
Body-
length: 20.7 (527mm)
width: 7.7 (196mm) at rear wheels, widest point
width: 7.1 (180mm) ahead of fr wheels, narrowest point
height: 5.3 (136mm)
Thickness: 0.60 (15.2mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
5 6x13mm Transmission 3 DTXC1573
4 8x16mm Front Wheel Hubs 2 DTXC1585
4 8x16mm Rear Wheel Hubs 2 DTXC1585
2 5x10mm Clutch Bell 1 DTXC1535
4 10x16mm Differentials 2 HPIC2032
2 6x10mm Flanged, Transmission 1 DTXC1565
The HPI Savage XL 5.9 is available in the following 27MHz radio
channels;
A1 HPID54A1 A4 HPID54A4
A2 HPID54A2 A5 HPID54A5
A3 HPID54A3 A6 HPID54A6
Body color will be either orange or blue. It is not possible to
request a specific body color because they are supplied by the
manufacturer at random.