HPI HPI10500

This is the 1/8 scale glow powered, radio controlled, ready to run
HPI Hellfire off-road Monster Truck.

Chassis: .12" (3mm) thick gunmetal colored aluminum construction
with black anodized aluminum upper deck
Drive: Four wheel shaft drive
Radio: HPI TF-3 pistol grip with high torque SF-2 steering servo and
standard torque SF-1 throttle servo/brake servo (made by AiRTRonics)
Receiver Battery: 1100mAh 5-cell NiMH receiver battery and 2-hour
(300mAh) wall charger
Engine: HPI Nitro Star K4.6 HO pull start with glow plug, fuel filter
and high flow 2-stage air filter (.28 cu in)
Exhaust: Gunmetal colored anodized aluminum tuned pipe with header
Fuel Tank: 5.1oz (150cc), with flip top cap and splash guard
Clutch: Three shoe
Transmission: Single speed
Ball Bearings: Full set included
Shocks: Four oil-filled, with coil-over spring, aluminum bodied with
3.5mm titanium nitride coated shafts for durability and maximum
performance, 24 possible mounting positions to fine tune suspension
The shocks are filled with 200 weight shock oil
Main Gear: 52 tooth steel construction
Clutch Bell: 13 tooth steel construction
Gearbox: Sealed front and rear
Differentials: Bevel gear type
Brakes: Vented steel disk
Tires: HPI Aggressor racing tread with foam inserts - HPIC4892
Wheels: Black 1-piece, aero dish - HPIC1513
Wheel Hubs: 17mm hex style retained with pin and grub screw
Body: Pre-trimmed and painted DRX truck body with applied decals
Bumpers: Black nylon front and rear
Suspension: Adjustable kick up, anti dive and anti-squat front and
rear anti-roll bars, no e-clips used on major suspension components
Caster: Adjustable with urethane eccentric bushings
Camber: Adjustable front and rear
Steering Tie Rods: Adjustable
Steering: Bellcrank with spring-loaded servo-saver
Sway bar: Front and rear factory installed
Warranty Period: 2 years from date of purchase

Factory assembled Hellfire model with engine and tuned pipe. Factory
painted body, 2 channel AM 27MHz pistol grip radio with hi-torque
steering servo and 5-cell NiMH receiver battery.

Radio Batteries: (8) AA size - EVEP1205
Glow starter: DTXP3000
Misc. Items: building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.

Vehicle-
length: 20.1" (513mm)
width: 16.3" (415mm)
height: 6.8" (173mm)
Weight: 9.2 lbs (4173g) RTR, less fuel
Wheelbase: 13.7" (348mm) varies with inboard toe setting
Tread: Front and Rear: 13.25" (336mm) (wheels on-center side-to-side)
Front Track: 16.25" (412mm)
Rear Track: 16.25" (412mm)
Ground Clearance: 2" (51mm)
Tires- Front and Rear - diameter: 5.47" (139mm) outside
diameter: 3.26" (83mm) inside
width: 2.91" (74mm)
Body-
length: 18" (457mm)
width: 7.25" (184mm)
height: 4.5" (114mm)

For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
2 5x10mm Clutch Bell DTXC1535 2
4 8x16mm Front and Rear Diffs DTXC1585 2
4 8x16mm Front and Rear Gearbox DTXC1585 2
2 8x16mm Center Diff DTXC1585 1
4 8x16mm Front Knuckle Arms DTXC1585 2
4 8x16mm Rear Hub Carriers DTXC1585 2
4 6x10mm Bellcrank DTXC1561 2
Body pictured on the box is painted red with black and gray decals
applied.
The shocks are filled with #200 wt shock oil in the front and rear
The radio channel cannot be choosen as the models are supplied at
random by HPI
jxs 9/12/05
kpm01/26/2006
ir/jxs
this information was sourced from Great Planes Model Distributors