HPI HPI103420
$592.79
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.RTR Vorza Flux Hp Vb-1 Buggy Body
HPI brand electric powered, radio controlled, 1/8 scale, ready to run
HPI Vorza Flux HP Buggy with VB-1 Body.
Chassis: 7075 Aluminum 0.16 (4mm) thick
Drive: Four wheel shaft
Motor: HPI Flux Tork 2200Kv brushless
Motor Mount: Aluminum with integrated heat sink and fan mount
Radio: HPI TF-3 AM system with BEC
ESC: HPI Flux Blur, sensorless programmable, with cooling fan
Battery Box: Fully adjustable to fit a variety of battery
configurations
Body: VB-1 buggy with rear wing, trimmed and painted with decals
applied
Differentials: Three, adjustable
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Suspension: Fully adjustable, sway bar equipped
Shocks: Big bore high performance oil-filled aluminum body
Shock Towers: 0.16 (4mm) thick 7075 anodized aluminum with front
nylon skid guards for durability
Tires: HPI Proto, 1.65 (42mm) wide, 4.6 (117mm) outer diameter
Wheels: HPI V7, black in color 7-spoke
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Two-year limited warranty beginning at date of purchase.
Warranty valid only in the USA, Canada and South America
RTR HPI Vorza Flux HP Buggy with painted VB-1 Body, radio, motor,
ESC tires, wheels, decals, wrenches and instruction sheet
AA Batteries: Eight for transmitter
Batteries: Two 6-7 nimh cell, minimum 4000mAh side by side packs
(DO NOT use stick packs with welded tabs)
OR two 2-3 cell LiPo packs, minimum 25C with at least 3500mAh
Battery Charger: For selected battery type
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if selected
batteries do not have them
Tools and track equipment
Vehicle;
length: 20 (508mm)
width: 12 (305mm)
height: 5.7 (146mm)
Wheelbase: 12.8 (325mm)
Weight: 7.1 lbs (3230g)
Body;
length: 13.1 (332mm)
width: 7.7 (195mm)
height: 4.3 (110m)
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 8x14mm Fr Hubs 2 DTXC1583
6 8x16mm Differentials 3 DTXC1585
4 8x16mm Drive Shafts 2 DTXC1585
4 6x10mm Steering Assembly 2 DTXC1561
The Vorza Flux body is painted silver with either red or blue stripes
It is not possible to request a specific stripe color because they
are supplied by the manufacturer at random.
HPI Vorza Flux HP Buggy with VB-1 Body.
FEATURES:
Chassis: 7075 Aluminum 0.16 (4mm) thick
Drive: Four wheel shaft
Motor: HPI Flux Tork 2200Kv brushless
Motor Mount: Aluminum with integrated heat sink and fan mount
Radio: HPI TF-3 AM system with BEC
ESC: HPI Flux Blur, sensorless programmable, with cooling fan
Battery Box: Fully adjustable to fit a variety of battery
configurations
Body: VB-1 buggy with rear wing, trimmed and painted with decals
applied
Differentials: Three, adjustable
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Suspension: Fully adjustable, sway bar equipped
Shocks: Big bore high performance oil-filled aluminum body
Shock Towers: 0.16 (4mm) thick 7075 anodized aluminum with front
nylon skid guards for durability
Tires: HPI Proto, 1.65 (42mm) wide, 4.6 (117mm) outer diameter
Wheels: HPI V7, black in color 7-spoke
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Two-year limited warranty beginning at date of purchase.
Warranty valid only in the USA, Canada and South America
YOU WILL RECEIVE:
RTR HPI Vorza Flux HP Buggy with painted VB-1 Body, radio, motor,
ESC tires, wheels, decals, wrenches and instruction sheet
REQUIREMENTS:
AA Batteries: Eight for transmitter
Batteries: Two 6-7 nimh cell, minimum 4000mAh side by side packs
(DO NOT use stick packs with welded tabs)
OR two 2-3 cell LiPo packs, minimum 25C with at least 3500mAh
Battery Charger: For selected battery type
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if selected
batteries do not have them
Tools and track equipment
SPECIFICATIONS:
Vehicle;
length: 20 (508mm)
width: 12 (305mm)
height: 5.7 (146mm)
Wheelbase: 12.8 (325mm)
Weight: 7.1 lbs (3230g)
Body;
length: 13.1 (332mm)
width: 7.7 (195mm)
height: 4.3 (110m)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 8x14mm Fr Hubs 2 DTXC1583
6 8x16mm Differentials 3 DTXC1585
4 8x16mm Drive Shafts 2 DTXC1585
4 6x10mm Steering Assembly 2 DTXC1561
The Vorza Flux body is painted silver with either red or blue stripes
It is not possible to request a specific stripe color because they
are supplied by the manufacturer at random.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov