HPI HPI101850

HPI brand 2.4GHz radio controlled, brushless electric powered, ready to run
1/8 scale HPI Vorza Flux HP Buggy.

Chassis: 6061 aluminum 0.16 (4mm) thick, with nylon dirt guards
Drive: Four wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
cooling fins, 5mm shaft
Pinion Gear: 15T steel
Spur Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12 (3mm) thick with 0.31 (8mm) thick
billet machined aluminum clamps
Radio: HPI TF-40 3-channel with end point adjustments, servo
reversing, steering dual rate and metal gear steering servo
ESC: HPI Flux Blur brushless ESC, 6S LiPo compatible with T-plug style connector
battery connectors, 6mm bullet motor connectors and cooling fan
PC programmable, USB Programming Kit required, order HPIC0573
Shocks: Oil-filled 16mm Big Bore aluminum bodied
Shock Towers: Aluminum, 0.16 (4mm) thick
Differentials: Three with spiral cut gears, oil filled
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Body: Trimmed and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo ready with secure hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
rear sway bars
Tires: HPI Proto, 1.65 (42mm) wide, 4.6 (117mm) outer diameter
Wheels: V7 black chrome 1.65 (42mm) wide, 3.27 (83mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two-year limited warranty through HPI beginning at date of
purchase. Warranty valid only in the USA, Canada and South America
Warranty not valid in the European Union

RTR 1/8 scale HPI Vorza Flux HP Buggy with brushless Motor & ESC,
2.4GHz 3-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

AA Batteries: Four for transmitter
Batteries: Two 6-7 cell NiMh flat (not stick packs) at least 4000mAh
soldered packs only, no welded tabs OR
two 2S or 3S LiPo with at least 25C rating
Battery Charger: To match selected batteries
Connectors: Two T-plug style connector Female Ultra Plugs (WSDM1303) if selected
batteries do not have them
Track equipment

Vehicle-
length: 20 (508mm)
width: 12 (205mm)
height: 7 (178mm)
Wheelbase: 12-13/16 (325mm)
Body-
length: 13.1 (334mm)
width: 7.71(196mm)
height: 3.8 (98mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Rear Differential 1 DTXC1585
4 8x14mm Front Hubs 2 DTXC1583
4 8x16mm Rear Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Rear Diff Case 1 DTXC1585
jxs 11/08/11
ir/jxs