HPI HPI100702
$150.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Cyber 10b Kit W/Cb-1 Clear Body
This is the 1/10 scale electric powered, radio controlled,
HPI Cyber 10B Off-Road Buggy kit.
FEATURES:
Drive: Four wheel shaft with steel axles, dogbones and outdrives
that are fully sealed for long life and smooth operation
Shocks: Composite bodied oil filled
Gearboxes: Closed
Ball Bearings: Full set, 18 total
Differentials: Front and rear ball type
Transmission: Single-speed with steel dogbones
Tires: HPI G-Rip, Front, 1.3" (34mm) wide, 3.4" (86mm) outer diameter
Rear 1.7" (43mm) wide, 3.4" (86mm) outer diameter both, 2.2" (56mm)
inner diameter
Wheels: White plastic five spoke, Front 1.2" (30mm) wide, 2.2"
(56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter
Motor Mount: Three pieces of cast aluminum allow easy motor rotation
for precise gear mesh alignment
Spur Gear: 84 tooth, 48 pitch
Bumpers: Nylon front
Battery Tray: Located under drivetrain, accomodates stick, side by
side and hard case LiPo batteries, batteries held in place with
plastic strap and two height adjustable clips
Body: Clear untrimmed buggy with wing and decals
Suspension: Hot Bodies D4 type with stainless steel hinge pins
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Ackerman: Adjustable, Ackerman refers to the action of the inside
front wheel turning faster than the outer front wheel during turns
Steering: Bell-crank type with servo saver
Warranty: Two year limited, valid only in the USA, Canada and South
America
YOU WILL RECEIVE:
HPI Cyber 10B Off-Road Buggy kit with tires, wheels, foam inserts, body, wing, 84 tooth 48 pitch spur gear, decal sheet and
instruction sheet
REQUIREMENTS:
steering)
Electric Motor: 540 type
Electronic Speed Control: Compatible with motor
AA Batteries: 8 for transmitter
Battery: 7.2V 6-cell stick pack
Battery Charger: Timed or peak for 6-cell battery
Pinion Gear: 48 pitch
Misc. Items: Track equipment
SPECIFICATIONS:
length: 11" (280mm)
width: 9.8" (250mm)
height: 6.3" (160mm)
Wheelbase: 11" (280mm)
BODY-
length: 12.6" (320mm)
width: 5.9" (150mm)
height: 2.8" (72mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
2 12x18x4mm Center drive shaft 1 DTXC1597
4 5x11x4mm Front Wheel Hubs 2 DTXC1547
4 5x11x4mm Rear Wheel Hubs 2 DTXC1547
2 12x18x4mm Front Diff Gear 1 DTXC1597
2 12x18x4mm Rear Diff Gear 1 DTXC1597
2 10x15x4mm Front Diff 1 DTXC1595
2 10x15x4mm Front Diff 1 DTXC1595
jxs 3/25/09
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov