HPI HPI100416
$94.79
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Flux Motiv brushless Esc
This is the Flux Motiv Brushless ESC from HPI Racing.
LiPo programmable low-voltage cutoff
High performance cross-cut aluminum heat sink
Proportional braking for great control off-power
Huge amount of continuous power handling
Smooth startup and run with sensorless motors
Reversing speedo with programmable reverse lock-out for racing
Extremely light weight
Authentic Dean's battery plug for a secure zero-loss connection
Durable on/off switch
Simple initial programming
Ability to easily adjust speedo parameters with HPI link cable
One Flux Motive Brushless ESC
Connecting to motor, battery, and receiver
Input: 6-8 cell NiMH/NiCd or 2 cell Lipo (with 5700Kv motor)
6-12 cell NiMH/NiCd or 2-3 cell Lipo (with 4600Kv or below)
Current: 70A continuous/ 380A burst
Resistance: 0.0007 ohms/phase)
When fitted with the Flux Warp 5700 motor or other motors with 5700Kv
of power, you can use up to 7 normal NiMH cells or a 2S LiPo battery.
When fitted with a motor with 4600Kv of power, you can use up to
12 NiMH cells or a 3S LiPo battery.
cnh 2/13/09
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
DIMENSIONS:
46 x 36 x 23mm (1.8"L x 1.4"W x 0.9"H)
Weight: 62.4 g (2.2 oz)
COMMENTS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov