Holmes Hobbies HHB230100018
$140.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
SHV800 V2 HV Direct Power Crawler brushless Servo (6-16.8V)
Holmes Hobbies SHV800 High Voltage Direct Power Waterproof Crawler brushless Servo. Capable of running on high voltage input of up to 16.8V! This enormously powerful servo can put out (1333oz/in) of torque and (0.11sec/60) of speed at 15.0V to provide you with all power, torque and speed needed for crawlers and heavy applications! Equipped with all CNC machined high quality steel gear, a super light and durable aluminum case thaT-Maxximizes heat dissipation and a waterproof design, this SHV800 is built to be extremely tough and durable to stand up to the roughest conditions! It is powered directly by a 2S to 4S LiPo battery with a JST plug to your ESC's battery plug to eliminate the need for an external BEC for cleaner wiring! gain space in a tight rig, and enjoy the performance from this beastly brushless servo!
Water resistant alum Case with O-Ring Seals
Oversized brushless motor with 200C rated Neodymium magnets
120 degree rotation
Waterproof internals
All CNC-machined steel gears with proven pin strength
Upgraded brushless motor with 200C rated magnets
24cm radio signal lead
2-4S (6-16.8V) compatible
JST connector for direct power
Eliminates the need for external BEC!
Operating Voltage: (2-4S) 6.0-16.8V
Speed:
8.4V: 0.21/sec
12.0V: 0.14/sec
15.0V: 0.11/sec
Torque:
8.4V: 805oz/in (58kg/cm)
12.0V: 1083oz/in (78kg/cm)
15.0V: 1333oz/in (96kg/cm)
Spline: 25T (Protek/Futaba)
Gear: CNC-machined Steel
Dimensions (LxWxH): 40x20x38.7mm
Weight: 94g
NOTE:
If using an ESC with a power switch, the battery must be disconnected from the ESC and servo when not in use to prevent damage to the servo and/or battery. Do not connect the servo directly to the battery balance port. Doing so can damage the servo and will void the warranty. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended inside the back of the servo if looking to increase water resistance for long term submersion. FEATURES:
Perfect for 1/0 crawler on any other applications in need of high torque and voltage servoWater resistant alum Case with O-Ring Seals
Oversized brushless motor with 200C rated Neodymium magnets
120 degree rotation
Waterproof internals
All CNC-machined steel gears with proven pin strength
Upgraded brushless motor with 200C rated magnets
24cm radio signal lead
2-4S (6-16.8V) compatible
JST connector for direct power
Eliminates the need for external BEC!
SPECIFICATIONS:
Motor: brushless Operating Voltage: (2-4S) 6.0-16.8V
Speed:
8.4V: 0.21/sec
12.0V: 0.14/sec
15.0V: 0.11/sec
Torque:
8.4V: 805oz/in (58kg/cm)
12.0V: 1083oz/in (78kg/cm)
15.0V: 1333oz/in (96kg/cm)
Spline: 25T (Protek/Futaba)
Gear: CNC-machined Steel
Dimensions (LxWxH): 40x20x38.7mm
Weight: 94g
YOU WILL RECEIVE:
(1) Holmes Hobbies SHV800 HV Waterproof Crawler brushless Servo
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov