Hobbico HCAA2014

This is a radio controlled, electric powered, hand launch Sky Screamer Ready-To-Fly Airplane Set with Two Channel Hobbico Radio, ON/OFF Switch with Auto Cut Off, NiMH Battery, Charger and Motor. Recommended for ages 12 and up - Adult supervision is recommended. Fully assembled and ready for flight in only a few quick steps. Everything needed to assemble and fly the airplane is included even the radio system. The simple 2-stick transmitter makes learning flight control easy. The left stick controls thrust, the right stick controls the power to make turns. Flight battery is a rechargeable NiMH (Nickel-Metal Hydride) pack that allows for longer flight times. A timed DC charger is included for recharging the on-board battery for 20 minutes. Dual 180 motors provide the thrust for flight and climbs, and steering power for turns. Electronic ON/OFF switch with auto cut-off controls the motors and reserves power for safe landings when battery power gets low. The fuselage is constructed of yellow ABS plastic with a large, black tapered tail boom pre-installed. The tail boom is made of a light- weight carbon fiber material that is wrapped with a filament for added strength. The tinted front canopy that covers the on-board battery is removable for recharging, and then reinstalls easily by a snap-fit onto the fuselage. The purple wings and tail assemblies are constructed of foam with a green and purple stripe design. The wing has a self-righting polyhedral shape combined with "winglets" that push turbulence out and away from the wingtip. This makes flying very stable. The wing is attached with an ABS plastic cover and two screws. Included how-to DVD explains assembly and provides flight tips. Warranty: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. One Sky Screamer Ready-To-Fly Electric Airplane with two 180 size Motors, Propellers, ON/OFF Unit and Radio Receiver One Rechargeable NiMH Battery Pack with Hobbico Custom Connector (Hobbico Custom Connector not sold separately) Two Spare Propellers Two Tail Sets (Vertical and Horizontal Stabilizers) One DC Battery Charger One Screwdriver One Instruction Manual One Hardware Package One how-to DVD One Spare Wing R (8) AA size alkaline batteries for the transmitter. (6) D size alkaline batteries for the charger Charging the included Nickel-Metal Hydride battery with DC charger. Final assemblies of attaching wing, tail group, motor covers, landing gear and installing the battery pack. Wingspan: 27.5" (698mm) Fuselage Length: 24" (610mm) Motor: (2) 180 size On-Board Battery: 4.8V 300mAh Pack with a Hobbico connector Do Not charge the included Nickel-Metal Hydride battery with any charger that is not specifically designed for charging Nickel-Metal Hydrides. Overheating and shortened battery life could occur. Airplane is designed for outdoor use only. If fuselage gets cracked or damaged, apply white glue and cellophane tape, then let it dry overnight. Final assemblies include: The entire tail assembly goes together by just installing two screws. Wing mounts with two screws. Attach the landing gear. For Transmitter NiCd Conversion Kit, use DTXP4009. For replacement propellers use HCAQ3480 For replacement batteries use (HCAM7111) dda 10/5/03 ir/jxs updt jxs 12/30/04 Updated JBM 12-19-05 &