Hobbico HCAA2013

This is a Ready-To-Fly, Radio Controlled, Electric Powered, Hand Launch Sky Zap Ready-To-Fly Airplane Set with Two Channel Hobbico Radio, ON/OFF Switch with Auto Cut Off, NiMH Battery, Charger and Motor. Recommended for ages 12 and up - Adult supervision is recommended. ***** Now comes with a spare wing ***** Fully assembled and ready for flight in only a few quick steps. Everything needed to assemble and fly the airplane is included even the radio system. The simple 2-stick transmitter makes learning flight control easy. The left stick controls trust; the right stick controls the power to make turns. Flight battery is a rechargeable NiMH (Nickel-Metal Hydride) pack that allows for longer flight times. A timed DC charger is included for recharging the on-board battery from a 12V car auxiliarly power jack in about 20 minutes. Dual 180 motors provide the thrust for flight and climbs, and steering power for turns. Electronic ON/OFF switch with auto cut-off controls the motors and reserves power for safe landings when battery power gets low. The fuselage is constructed of White ABS plastic with a large, Black tapered tail boom pre-installed. The tail boom is made of a light- weight carbon fiber material that is wrapped with a filament for added strength. The tinted front canopy that covers the on-board battery is removable for recharging, and then reinstalls easily by a snap-fit onto the fuselage. The blue wings and tail assemblies are constructed of foam with an Orange and Yellow stripe design. The wing has a self-righting polyhedral shape combined with "winglets" that push turbulence out and away from the wingtip. This makes flying very stable. The wing is attached with an ABS plastic cover and two screws Included how-to video explains assembly and provides flight tips Warranty: Hobbico guarantees this kit to be free from defects in both material and workmanship at the date of purchase. One Sky Zap Ready-To-Fly Electric Airplane with pre-installed Motors, Propellers, ON/OFF Unit and Radio Receiver One Rechargeable NiMH Battery Pack with Hobbico Custom Connector (Hobbico Custom Connector not sold separately) Two Spare Propellers One Tail Set (Vertical and Horizontal Stabilizers) One DC Battery Charger One Screwdriver One Instruction Manual One Hardware Package One how-to Video One Spare Wing (8) AA size alkaline batteries for the transmitter Charging the included Nickel-Metal Hydride battery with DC charger Final assemblies of attaching wing, tail group, motor covers, landing gear and installing the battery pack. Wingspan: 42.5" (1080mm) Wing Area: 212 sq in (13.25 sq dm) Flying Weight: 13.5 oz (385g) Wing Loading: 9.5 oz/sq ft (29 g/sq dm) Fuselage Length: 30" (761mm) Center of Gravity: 2½" back from the leading edge of the wing This may need to be moved depending on the wind (see COMMENTS) Motor: (2) 180 size On-Board Battery: 7.2V 600mAh 2/3AA Pack with a Hobbico connector. Flight Time: approximately 10 minutes Do Not charge the included Nickel-Metal Hydride battery with any charger that is not specifically designed for charging Nickel-Metal Hydrides. Overheating and shortened battery life could occur. Airplane is designed for outdoor use only If fuselage gets cracked or damaged, apply white glue and cellophane tape, then let it dry overnight. Final assemblies include: The entire tail assembly goes together by just installing three screws. Wing mounts with two screws. Struts simply hook into the wing and screw into the bottom of the fuselage. Attach the landing gear. For Transmitter NiCd Conversion Kit use DTXP4009 For replacement propellers use HCAQ3330 Depending on wind conditions, you may need to change the CG, please read the Instruction Update that is in your kit. JAL 7/3/01 ir/kh upd jpg 9/26/03 &