Hot Bodies HBS110754
$799.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.HB Racing 1/8 R8 Nitro 4WD Kit
Hot Bodies brand 1/8 scale Electric Powered, Radio Controlled
R8 On-Road Car Kit from Hot Bodies.
**Additional Technical Info Will Be Added When It Becomes Available. **
side, and rear for extra ground clearance when cornering,
carbon fiber upper deck and rear chassis brace
Drive: Four wheel belt with fiber reinforced drive belts
Shocks: Aluminum body oil-filled, laydown position
Shock Towers: Woven graphite
Transmission: light weight adjustable two-speed, centrifugal clutch
allows fine tuning for precise control
Differentials: Solid rear diff and front one-way differential
Front Bumper: Aerodynamic composite plastic
Rear Bumper: Venturi effect
Suspension: Front and rear pivot ball, adjustable sway bars
Axles: Quick change design fit all popular wheel brands
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Ball Bearings: Fully equipped
Fuel Tank: Centrally mounted,
oz (
cc)
Bulkheads: 7075 aluminum
Engine: .21 cu in engine w/rear slide valve carburetor
Muffler: Tuned pipe and header
Body:
Tires: Foam mounted to wheels
Fuel, Starter Box, Building and Track Equipment
width: 10.4 (265mm)
Wheelbase: 11.5 (292mm)
Weight: 5.4lbs (2450g)
Gear Ratio: 1st=7.53:1.0, 2nd=5.2:1.0
R8 On-Road Car Kit from Hot Bodies.
**Additional Technical Info Will Be Added When It Becomes Available. **
FEATURES:
Chassis: Billet machined 7075 aluminum with chamfered edges at front, side, and rear for extra ground clearance when cornering,
carbon fiber upper deck and rear chassis brace
Drive: Four wheel belt with fiber reinforced drive belts
Shocks: Aluminum body oil-filled, laydown position
Shock Towers: Woven graphite
Transmission: light weight adjustable two-speed, centrifugal clutch
allows fine tuning for precise control
Differentials: Solid rear diff and front one-way differential
Front Bumper: Aerodynamic composite plastic
Rear Bumper: Venturi effect
Suspension: Front and rear pivot ball, adjustable sway bars
Axles: Quick change design fit all popular wheel brands
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Ball Bearings: Fully equipped
Fuel Tank: Centrally mounted,
oz (
cc)
Bulkheads: 7075 aluminum
YOU WILL RECEIVE:
REQUIREMENTS:
Radio: 2-channel with high-speed steering servoEngine: .21 cu in engine w/rear slide valve carburetor
Muffler: Tuned pipe and header
Body:
Tires: Foam mounted to wheels
Fuel, Starter Box, Building and Track Equipment
SPECIFICATIONS:
length: 18.5 (470mm)width: 10.4 (265mm)
Wheelbase: 11.5 (292mm)
Weight: 5.4lbs (2450g)
Gear Ratio: 1st=7.53:1.0, 2nd=5.2:1.0
COMMENTS:
jxs 10/27/15
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov