Great Planes GPMA1350

GPM Racing brand Radio Controlled, Glow Powered, Almost Ready-to-Fly,
Great Planes Super Stearman 1.20 Sport Airplane Kit.
For Intermediate to Advanced Modeler/Fliers, IMAA legal.

Construction: Balsa and plywood
Wings: Balsa and plywood, both one-piece, semi-symmetrical airfoil
Cowl: Painted fiberglass with inner plywood ring that provides
strength and allows cowl to be attached with no visible screw heads
Covering: Top Flite MonoKote, color scheme is predominately White
with with Red and Black accents, see COMMENTS for MonoKote colors
Radio Compartment: Plywood reinforced, accessible over lower wing
Wheel Pants, and Landing Gear Fairings: Fiberglass, painted to match
covering scheme
Interplane Struts: Painted fiberglass
Cabanes: Painted metal
Open Cockpit: Two with fully detailed and painted pilot figures,
trimmed and detailed clear plastic windshields, rubber cockpit
coaming
Cockpit Instrument decals
Landing Gear: Aluminum with steerable tailwheel
Wheels: Two 3 (95mm) foam, one 1 (32mm) foam tailwheel
Spinner: 2 (63mm) aluminum
Aileron Control: Four servos, coupling rods are supplied if modeler
desires two servo control
Hardware: Full set included
Motor Mount: Composite, two-piece construction
Building Time: Ready to fly in 16-20 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at date
of purchase.

Pre-built wing fuselage and tail assemblies, aluminum main landing
gear, 2-piece engine mount, aluminum spinner, hardware package
fiberglass cowling landing gear fairings and wheel pants, plastic
replica radial engine, two detailed pilot figures, wheels, 24oz fuel
tank, all assembly hardware, photo-illustrated instructions, and
cockpit coaming

Engine: .91 (14.9 cc) - 1.20 (19.66cc) 2 or 4 stroke
Muffler: Pitts style if using 2-stroke engine, or standard muffler
included with 4-stroke engine
Radio: 4-channel
Servos: 5 standard size, 4 with 54 oz-in torque minimum,
one with 42 oz-in of torque for throttle
(2-ailerons, 1-elevator, 1-rudder, 1-throttle)
Servo Extension 12: Two for aileron servos
Y-Harness: One for aileron servos
if building kit with four aileron servos, two additional
aileron servos, two additional servo extensions, and one additional
Y-harness will be needed
Misc. Items: glow plug, foam rubber padding, 2' large fuel tubing,
fuel filter, propeller, building and field equipment.

Top Wingspan: 71.5 (1815mm)
Bottom Wingspan: 69 (1755mm)
Total Wing Area: 1466 sq in (94.70 sq dm)
Weight: 14-15lb (6.35-6.8kg)
Wing Loading: 22-23.5 oz/sq ft (67.13-71.71g/sq dm)
length: 57 (1450mm)
Airfoil: Semi-symmetrical
Center of Gravity: 5 (140mm) Back from the leading edge of the
TOP wing
Control Throws- Low Rate High Rate
Ailerons: Up & Down
Bottom Wing: 9/16 (14mm) 1 (25mm)
Top Wing: (19mm) 1 (32mm) up
7/8 (22mm) 1 (38mm) down
Elevator: Up & Down 7/8 (22mm) 1 (25mm)
Rudder: Right & Left 1 (25mm) 1 (38mm)
Incidences:
Top and bottom wing: 0
Stabilizer: 0
Engine Thrust: Down: 1
Right: 3
COMMENTS
Following are the colors used on this model and order numbers for
6 foot rolls:
White: TOPQ0204 True Red: TOPQ0227
Black: TOPQ0208
For replacement landing gear wheels, order the DuBro 4 Diameter
Wheel (DUBQ0845). They are slightly larger than the original wheels
but will fit. If axles are needed, order the 3/16 x 2 Axle Shafts
(DUBQ1115). The holes in the landing gear will have to be slightly
enlarged.
If a replacement fuel tank is needed, order the Sullivan 24oz
tank (SULQ1444), or the DuBro 24oz tank (DUBQ0224).
Some minor trimming and modifications may be required.
jxs 2/25/04
updated wm 6/18/04
updated missle red monokote cc 7/20/04
updt jxs 10/13/04
MonoKote colors checked & matched updated tjt 022305
updt jxs 11/16/09
updt jxs 05/09/12