Great Planes GPMA1274
$99.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.YAK 55 3D EP ARF FLIGHTFLEX
This is the electric powered, radio controlled, Almost Ready to Fly
Great Planes Yak 55 3D 3D Aerobatic Park Flyer Airplane.
Construction: FlightFlex EPP (Expanded Polypropolene) enables plane
to keep flying even after most crashes
Trim Scheme: Yellow, Red, White and Blue
Wings: One piece Flight Flex Foam constrution with foam ribs and
carbon fiber tube reinforcement
Motor: 370 size equipped with ball bearings and 5:1 gearbox pre-
assembled (50 tooth spur and 10 tooth pinion)
Aileron Control: Dual Servo
Hardware: Complete hardware included
Propeller: 11x4.7 (GPMA2786) with aluminum prop saver (GPMQ4620)
Building Time: Ready to fly in 2-3 hours
Cowling: FlightFlex construction
Fuselage, main wing, cowling, motor and gear box, prop, prop saver,
hardware package, and photo illustrated instructions
Radio: 4-channel with micro receiver - FUTJ37**
Servos: 4 micro size (9g or less) - FUTM0046
6" Servo Extension: Two required - HCAM2000 (for aileron servos)
12" Servo Extension: Two required - HCAM2100
Y-Harness: Standard Y-Harness HCAM2500 (For aileron Servos)
Speed Control: 35A - GPMM2035 (you will have to install a male Dean's
battery plug onto this esc to match the battery pack - WSDM1302)
Battery: 3S 11.1V 1200-1500mAh Lithium Polymer - GPMP0831
Charger: Designed for charging Lithium Polymer packs - GPMM3150
Building and field equipment: Low Temp. Glue Gun and glue sticks and
other miscellaneous equipment - WOOU1445 and WOOU1446
Wingspan: 34.5" (875mm)
Wing Area: 352 sq in (22.7 sq dm)
Weight: 14-16oz (397-454g)
Wing Loading: 5.7-6.5 oz/sq ft (17-20g/sq dm)
length: 38" (965mm)
The manual lists the incorrect pinion gear. The correct pinion gear
is GPMG0237.
jxs 7/18/05
kpm 11/22/05
ir/jxs
updt wm 12/09/05
updt jxs 02/06/06
this information was sourced from Great Planes Model Distributors
Great Planes Yak 55 3D 3D Aerobatic Park Flyer Airplane.
FEATURES:
Construction: FlightFlex EPP (Expanded Polypropolene) enables plane
to keep flying even after most crashes
Trim Scheme: Yellow, Red, White and Blue
Wings: One piece Flight Flex Foam constrution with foam ribs and
carbon fiber tube reinforcement
Motor: 370 size equipped with ball bearings and 5:1 gearbox pre-
assembled (50 tooth spur and 10 tooth pinion)
Aileron Control: Dual Servo
Hardware: Complete hardware included
Propeller: 11x4.7 (GPMA2786) with aluminum prop saver (GPMQ4620)
Building Time: Ready to fly in 2-3 hours
Cowling: FlightFlex construction
INCLUDES:
Fuselage, main wing, cowling, motor and gear box, prop, prop saver,
hardware package, and photo illustrated instructions
REQUIREMENTS:
Radio: 4-channel with micro receiver - FUTJ37**
Servos: 4 micro size (9g or less) - FUTM0046
6" Servo Extension: Two required - HCAM2000 (for aileron servos)
12" Servo Extension: Two required - HCAM2100
Y-Harness: Standard Y-Harness HCAM2500 (For aileron Servos)
Speed Control: 35A - GPMM2035 (you will have to install a male Dean's
battery plug onto this esc to match the battery pack - WSDM1302)
Battery: 3S 11.1V 1200-1500mAh Lithium Polymer - GPMP0831
Charger: Designed for charging Lithium Polymer packs - GPMM3150
Building and field equipment: Low Temp. Glue Gun and glue sticks and
other miscellaneous equipment - WOOU1445 and WOOU1446
SPECIFICATIONS:
Wingspan: 34.5" (875mm)
Wing Area: 352 sq in (22.7 sq dm)
Weight: 14-16oz (397-454g)
Wing Loading: 5.7-6.5 oz/sq ft (17-20g/sq dm)
length: 38" (965mm)
COMMENTS:
The manual lists the incorrect pinion gear. The correct pinion gear
is GPMG0237.
jxs 7/18/05
kpm 11/22/05
ir/jxs
updt wm 12/09/05
updt jxs 02/06/06
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov