Great Planes GPMA1154
$189.99

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Great Planes PBY Catalina Seaplane EP ARF 53.5 inch
GPM Racing brand radio controlled, electric powered, Almost Ready-to-Fly,
Great Planes ElectriFly PBY Catalina Seaplane.
For intermediate modeler/fliers.
FEATURES:
Construction: Fiberglass hull, balsa & plywood wing and tail section
Wing: Two-piece with aluminum wing joiner tube, tip floats and pre-
installed motor leads
Covering: Factory applied iron-on
Radio Compartment: Easy access hatch on top of fuselage
Aileron Control: Dual servo with extensions pre-installed
Motor Mounts: Plywood with plastic cowls
Propellers: Two plastic 8x6 (GPMQ6610)
Airplane Stand: Tubes with foam cradles holds plane during assembly
process and allows easy transport
Building Time: Ready to fly in only 6-10 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.
YOU WILL RECEIVE:
Great Planes ElectriFly PBY Catalina Seaplane with decal sheet,
plywood motor mounts, two plastic nacelles, two wing tip floats,
two 8x6 plastic propellers, two plywood motor mounts, two aileron
extensions, hardware package, photo-illustrated instructions,
removable water rudder
REQUIREMENTS:
Radio: Four channel with micro receiver
Servos: Two micro high torque (FUTM0414).
Radio listed above includes two servos (total number of four servos
required)
Servo Extensions: Two 6 (152mm) (HCAM2000)
Y-Harnesses: Two (HCAM2500)
Motors: Two brushless (GPMG4560)
Electronic Speed Controls: Two ElectriFly SS-25 (GPMM1820)
Parallel ESC Adapter: (GPMM3141)
Battery: 11.1V, 2100mAh LiPo
Cell Balancer: (GPMM3160) if using charger that doesn't have
balancing capabilities
Battery Charger: LiPo compatible
Building and field equipment
SPECIFICATIONS:
Wingspan: 53.5 (1360mm)
Wing Area: 395 sq in (25.5 sq dm)
Weight: 3 - 3.25lb (1360 - 1470g)
Wing Loading: 18 - 19 oz/sq ft (55 - 58 sq dm)
length: 34.25 (870mm)
Airfoil: Flat bottom
Center of Gravity: 2-1/8 (54mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: 1/2 (13mm) 5/16 (8mm)
Rudder: Right to Left 3/4 (19mm) 3/8 (10mm)
Ailerons: Up & Down 3/8 (10mm) 1/4 (6mm)
jxs 03/08/07
ir/jxs