Great Planes GPMA0966

GPM Racing brand radio controlled, glow powered, balsa and plywood
Carl Goldberg Tiger 2 .40 sport scale aerobatic airplane kit.
For beginner to intermediate modeler/fliers.

All Carl Goldberg kits include fuselage alignment devices and most
feature highly-refined interlocking lite ply contruction methods.
Wings: One piece covered balsa and plywood construction.
Radio compartment: Large built in balsa and ply radio tray.
Landing gear: Wire main and nose
Hardware: Complete hardware included
Motor Mount: Included adjustable engine mount
Warranty: Carl Goldgerg Products guarantees this kit defect-free
in both materials and workmanship at the date of purchase.

All wood to construct airplane, pushrods, prebent wire aluminum main
landing gear, prebent nose wire, adjustable engine mount, horns,
decals, photo-illustrated instructions, full-size rolled plans.

Engine: .35-.45 cu in (5.7-7.4 cc) 2-stroke
OR .40-.50 cu in (6.5-8.2 cc) 4-stroke
Radio: 4-channel miniumum required
Servos: 4-standard servos
(1-ailerons, 1-elevator, 1-rudder, 1-throttle)
Covering: Two 6-foot rolls of covering.
Misc. Items: Three 2 wheels, 2 spinner, 6-8oz fuel tank,
5/32 wheel collars, glow plug, foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment.

Wingspan: 61 (1549mm)
Wing Area: 680 sq in (4387sq cm)
Weight: 4.75 - 5.25lb
Airfoil: Fully-symmetrical Low Wing
Center of Gravity: 3-4-5/8 (88.9-117mm)
back from the wing's leading edge at the fuselage sides.
Control Throws- control throws for rudder, elevator, and ailerons
are set off of included gauge in instruction manual.
pjm 3/21/03
ir/jxs

This item is out of stock