Futaba FUTM4160
$169.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.CR2000 12V DC Peak Charger Tx/Rx/Glow
Futaba brand Futaba 12V DC Battery Charger.
Charges NiCd and NiMH transmitter and receiver batteries,
and glow plug igniters.
FEATURES: Peak charge detection, auto cut-off and audio alert
LCD screen displays input and output voltage, charge current, peak
voltage, charge time, and amount.
YOU WILL RECEIVE: One Futaba 12V Battery Charger with cigarette lighter adapter,
alligator clips, 28 (711mm) transmitter charge cord, and two
20 and 80 (508mm and 2032mm) receiver charge adapter cords.
REQUIRES: 11-15V DC power supply having an output capacity of 6A or more.
(GPMP0901)
SPECS: Battery Range: Tx: 6-8 cells, 500-2000mAh
Rx: 4-6 cells, 50-2000mAh
Glow Plugs: 1 cell, 2000-3000mAh
Input Voltage: DC11V-16V
Operation Voltage: 10.5V
Charging Current: Tx 0.5A-2A
Rx 0.05-2A
Cut Off: Delta Peak
Trickle charge rate: at .05 to .45A rate is 5 mils
at .5 to 2.5A rate is 70 mils
Length: 6 (152mm)
Width: 3.4 (86mm)
Height: 1.4 (36mm)
Weight: 355g (12.5oz)
COMMENTS: For use with NiCDs or NiMH batteries only.
TX and RX can be charged simultaneously.
Don't short-circuit or reverse connect battery.
Avoid places where the charger will be exposed to direct sunlight.
Perform charging within the 41-104F?(5-40C?) temperature range.
Do not charge radio batteries and glow starter simultaneously.
jxs 9/12/03
upd NNA 12/18/03
ir/jxs
updated jpg 6/12/08
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov