Futaba FUTS3010
$32.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
discontinued Analog S3010 Standard High-Torque Bb Servo
Futaba brand Futaba Standard Size Ball Bearing High Torque Servo.
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering approximately 2A for each servo.
FEATURES:
Ideal for high-torque applications requiring a standard size servo
Universal connector fits Futaba, Hitec, JR, KO Propo, Airtronics Z,
and Tower Hobbies. Does not fit old Airtronics A plug w/out adapter
Nylon gears
One bearing pre-mounted on output shaft.
One year warranty
YOU WILL RECEIVE:
One Futaba standard size high torque servo with;
One 1.4 (35mm) diameter round servo wheel
One 1.5 (39mm) diameter 4 point servo wheel
One 1.25 (32mm) diameter 6 point servo wheel
Four 2mm x 11mm phillips screws
Four rubber grommets & Four metal eyelets
REQUIREMENTS:
Small phillips screwdriver to mount to surface
SPECIFICATIONS:
Speed: 0.20 sec/60? @ 4.8V
0.16 sec/60? @ 6.0V
Torque: 72 oz-in (5.2 kg-cm) @ 4.8V and
90 oz-in (6.5 kg-cm) @ 6V
Dimensions: 1.6 x 0.8 x 1.5 (1-9/16 x 13/16 x 1-1/2)
(40 x 20 x 38mm)
Weight: 1.5oz (1-7/16oz) (41g)
jxs 5/14/03
ir/jxs
updt jxs 9/29/03
jxs 10/29/04
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering approximately 2A for each servo.
FEATURES:
Ideal for high-torque applications requiring a standard size servo
Universal connector fits Futaba, Hitec, JR, KO Propo, Airtronics Z,
and Tower Hobbies. Does not fit old Airtronics A plug w/out adapter
Nylon gears
One bearing pre-mounted on output shaft.
One year warranty
YOU WILL RECEIVE:
One Futaba standard size high torque servo with;
One 1.4 (35mm) diameter round servo wheel
One 1.5 (39mm) diameter 4 point servo wheel
One 1.25 (32mm) diameter 6 point servo wheel
Four 2mm x 11mm phillips screws
Four rubber grommets & Four metal eyelets
REQUIREMENTS:
Small phillips screwdriver to mount to surface
SPECIFICATIONS:
Speed: 0.20 sec/60? @ 4.8V
0.16 sec/60? @ 6.0V
Torque: 72 oz-in (5.2 kg-cm) @ 4.8V and
90 oz-in (6.5 kg-cm) @ 6V
Dimensions: 1.6 x 0.8 x 1.5 (1-9/16 x 13/16 x 1-1/2)
(40 x 20 x 38mm)
Weight: 1.5oz (1-7/16oz) (41g)
jxs 5/14/03
ir/jxs
updt jxs 9/29/03
jxs 10/29/04
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov