Futaba FUTK3000

This is the Futaba 3-Channel 3VCS Computer 2-Stick Radio with the 2.4GHz FASST System. Transmitter and R603FS receiver only, servos not included. Ideal for car, truck and boat modelers who prefer stick radios. FASST (Futaba Advanced Spread Spectrum Technology) sends twice as much information to the receiver at eight times the resolution of standard systems for unsurpassed control and smooth servo travel 2.4GHz circuitry is wired directly into transmitter eliminating separate plug-in modules "Auto Detect" instantly determines whether HRS or PPM mode is active in the transmitter Special ID code prevents signal interruption by rejecting unwanted signals Stick position angle adjustment (+5 to -5°) In addition to great performance in R/C car and truck applications, this system is also ideally suited to the rigors of boat racing "New Driver" "Race Ready" and "Expert" menus Traction control and brake mixing (front/rear independent) w/delay "Direct Select" programming shortcuts Sub-trim, servo reversing and EPA on all channels Throttle start/acceleration One year limited warranty 2.4GHz FASST Futaba 3-Channel 3VCS transmitter with module, flat blade screwdriver, ratchet plate for throttle stick and on/off switch 2.4GHz FASST Futaba R603FS 3-Channel Receiver (FUTL7630) Servos of modeler's choice Eight AA batteries for transmitter, or Futaba NT8F700B 700mAh NiCD battery pack (FUTM1462) Transmitter; Current Drain: 300mA or less Transmitting Antenna: 2.4GHz Receiver; Reception Antenna: Diversity type (internal and external) Power Requirement: 6V NiCd battery DSC Function Available Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm) Weight 0.50oz (14.1g) jxs 04/13/07 ir/jxs