Futaba FUTK1200

This is the Futaba 2PL 2.4GHz Computer Radio system with the R603GF 3-Channel Receiver and No Servos. Ideal for cars, boats, yachts and other models. FHSS (Frequency Hopping Spread Spectrum) eliminates frequency pins and signal interference-pushbutton transmitter/receiver linking with no binding plugs R603GF receiver has a flexible coaxial antenna that is easy to position inside model for ideal reception One-button programming for fast and easy menu access EEPROM memory stores and selects preset programming for up to ten different models One trim switch allows setting and adjusting trims without returning to the menu Steering dual rate strategically located on the grip close to the trigger offers more mid-range control, crucial when cars are going into corners Steering/Throttle End Point Adjustment (EPA) limits servo travel for more control and to prevent servo damage ABS braking initiates ON and OFF pulsing for less skidding and can be set for slow, mid, or fast pulsing One year limited warranty through manufacturer beginning at date of purchase Futaba 2PL 2.4GHz Transmitter R603GF Receiver, FUTL7615 On/Off Switch and instruction manual 4 AA batteries Servos of modeler's choice Transmitter: Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Receiver: Power Requirement: 4.8V or 6V NiCd battery Size: 1.02 x 1.53 x 0.39" (26 x 39 x 10mm) excluding area where servos plug in Weight: 0.28oz (8g) 2PL 2.4GHz is not compatible with Futaba FASST systems. The Futaba R2004GF (FUTL7617) and R2104GF (FUTL7616) receivers are also compatible with the 2PL 2.4GHz system WHILE THIS TRANSMITTER COMES WITH A CHARGE PLUG BUILT IN, IT CANNOT BE USED UNLESS YOU USE PART NUMBER HCAP0101 AND A CHARGER THAT CAN HAVE THE CHARGE CURRENT ADJUSTED TO 4.8 VOLTS AT 200 MAH. jxs 8/11/09 ir/jxs updated jpg 10/27/10 &