Futaba FUTM0027
$12.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued S3004 Servo Standard BB Bulk No arms or hardware in
This is the Futaba S3004 Light Weight, Ball Bearing Servo.
**Horns and Mounting Hardware are not included, see REQUIRES below. **
This basic servo is used in cars, boats, or where standard servos are used.
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Single ball bearing on output shaft
Precise tight fit throughout the geaRTRain
Being standard size and light weight, it fits many applications
Nylon gears
One year warranty
Does not include any horns (use FUTM3551 for the horn set)
If mounting hardware is needed, order Screws (FUTM2250), Eyelets
(FUTM3650) and Grommets (FUTM2346)
Speed: 0.23 sec/60 @ 4.8V
0.19 sec/60 @ 6.0V
Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6.0V
length: 1.59" (40.4mm)
width: 0.78" (19.8mm)
height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire
inch (millimeters)
1.42 (36) bottom to top of case (not output shaft)
.60 (15) flange to top of shaft
1.0 (25) flange to bottom of servo
1.59 (40.4) case length {1.93 (49) holes on-center}
.78 (19.8) case width {.39 (10) holes on-center}
**Horns and Mounting Hardware are not included, see REQUIRES below. **
This basic servo is used in cars, boats, or where standard servos are used.
NOTE:
This servo is NOT designed for use with glow powered helicopters. This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
FEATURES:
Precise tight fit throughout the geaRTRain
Being standard size and light weight, it fits many applications
Nylon gears
One year warranty
YOU WILL RECEIVE:
One S3004 standard servo REQUIREMENTS:
If mounting hardware is needed, order Screws (FUTM2250), Eyelets
(FUTM3650) and Grommets (FUTM2346)
SPECIFICATIONS:
0.19 sec/60 @ 6.0V
Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6.0V
length: 1.59" (40.4mm)
width: 0.78" (19.8mm)
height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire
COMMENTS:
1.42 (36) bottom to top of case (not output shaft)
.60 (15) flange to top of shaft
1.0 (25) flange to bottom of servo
1.59 (40.4) case length {1.93 (49) holes on-center}
.78 (19.8) case width {.39 (10) holes on-center}
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov