Futaba FUT01102277-1
$19.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
Analog Servo Standard Bb
This is a Standard Servo with a Ball Bearing on the output shaft.
This has a "J" connector and uses a nylon gears.
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable of delivering sufficient amps.
Single Top Ball Bearing
Same mounting as S148 and S9201 (individual rectangular grommets)
3-pole motor
Nylon gears
One accessory package
(40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Torque: 33 oz-in (2.4kg-cm) @ 4.8V
42 oz-in (3.0kg-cm) @ 6V
Transit: 0.28 sec/60 @ 4.8V
0.22 sec/60 @ 6V
This has a "J" connector and uses a nylon gears.
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES:
Same mounting as S148 and S9201 (individual rectangular grommets)
3-pole motor
Nylon gears
YOU WILL RECEIVE:
One S3001 Standard Servo One accessory package
SPECIFICATIONS:
DIMENSIONS:
1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Torque: 33 oz-in (2.4kg-cm) @ 4.8V
42 oz-in (3.0kg-cm) @ 6V
Transit: 0.28 sec/60 @ 4.8V
0.22 sec/60 @ 6V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov