Futaba FUT01102217-1
$15.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
S148 Analog Servo Precision 0.28 sec 42 oz-in
The S148 Standard Servo yields increased power and speed with a reduced size
and weight compared to the S128, yet uses the same gears and servo cases.
This servo is a replacement for the following servos. (S6, S17, S18, S23, S26, S28
S38, S128)
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
bushing
One accessory package with round rubber grommets, brass eyelets,
mounting screws, round and star shaped servo horn
Nylon gears
One year warranty
Motor: 3-pole
Power requirement: 4.8V or 6V (from receiver)
Power consumption: 6V 8mA (at idle)
Torque: 33 oz-in (2.4 kg-cm) @ 4.8V
42 oz-in (3.0 kg-cm) @ 6V
Transit Time: 0.28 sec/60 @ 4.8V
0.22 sec/60 @ 6V
(40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Mounting on-center dimensions
width: .4"
length: 1.9"
Shaft diameter: 5.88mm
ir/jl
updt jxs 10/29/03
ir/jxs
updated mcw 5/19/04
updt jxs 10/29/04
updated jpg 10/24/07
Updated JAW 11/27/07
&
and weight compared to the S128, yet uses the same gears and servo cases.
This servo is a replacement for the following servos. (S6, S17, S18, S23, S26, S28
S38, S128)
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
YOU WILL RECEIVE:
One S148 Standard Precision Servo w/"J" connector and metal top bushing
One accessory package with round rubber grommets, brass eyelets,
mounting screws, round and star shaped servo horn
Nylon gears
One year warranty
SPECIFICATIONS:
Control system: Pulse width control, 1.52ms neutral Motor: 3-pole
Power requirement: 4.8V or 6V (from receiver)
Power consumption: 6V 8mA (at idle)
Torque: 33 oz-in (2.4 kg-cm) @ 4.8V
42 oz-in (3.0 kg-cm) @ 6V
Transit Time: 0.28 sec/60 @ 4.8V
0.22 sec/60 @ 6V
DIMENSIONS:
1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Mounting on-center dimensions
width: .4"
length: 1.9"
Shaft diameter: 5.88mm
ir/jl
updt jxs 10/29/03
ir/jxs
updated mcw 5/19/04
updt jxs 10/29/04
updated jpg 10/24/07
Updated JAW 11/27/07
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov