Futaba FUT01102164-1
$12.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
discontinued Analog S3003 Servo Standard
Futaba brand S3003 Standard Servo. This basic servo is used in cars, boats, or where standard servos are used. This is the replacement for the following servos, S138, S148, S22, S38 and S12. This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable of delivering sufficient amps.
Four brass eyelets
Four Black rectangular rubber grommets (FUTM2348)
Four servo mount screws
One servo wheel 1-3/8 (35mm) in diameter
One X-shape servo arm 1.5 (38mm) across
One star shaped arm 1-1/4 (32mm) across
Nylon gears
One year warranty
0.19 sec/60 @ 6V
Torque: 44 oz-in (3.2 kg-cm) @ 4.8V
57 oz-in (4.1 kg-cm) @ 6V
(40 x 20 x 36mm)
Weight: 1.3oz (1-5/16oz) (37g)
Connector: J type with approx. 5 inch lead
description revised by: DB June 17, 2013
If using NiMh or LiPo batteries, make sure they are capable of delivering sufficient amps.
YOU WILL RECEIVE:
One S3003 standard servo with pre-installed X-shape servo horn FUTM0031Four brass eyelets
Four Black rectangular rubber grommets (FUTM2348)
Four servo mount screws
One servo wheel 1-3/8 (35mm) in diameter
One X-shape servo arm 1.5 (38mm) across
One star shaped arm 1-1/4 (32mm) across
Nylon gears
One year warranty
SPECIFICATIONS:
Speed: 0.23 sec/60 @ 4.8V0.19 sec/60 @ 6V
Torque: 44 oz-in (3.2 kg-cm) @ 4.8V
57 oz-in (4.1 kg-cm) @ 6V
DIMENSIONS:
1.6 x 0.8 x 1.4 (1-9/16 x 13/16 x 1-7/16)(40 x 20 x 36mm)
Weight: 1.3oz (1-5/16oz) (37g)
Connector: J type with approx. 5 inch lead
description revised by: DB June 17, 2013
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov