Miscellaneous brand FAN36101

5x1 alum 2 Modified Motor w/Comm Ring - 4 Cell Touring
The alum 2 is the latest addition to our Factory Team Modified Motor series, featuring Checkpoint can/endbell technology. This technology has proven itself around the world as the premier motor setup, and is now available from Fantom Racing with our hottest winds and team tuning specs. With our 26 years of motor building experience, let us build your next pro-level modified motor.
alum 2

FEATURES:

• CP Endbell Technology €“ Precision made with generous venting for maximum cooling and efficiency.


• Hand-Wound Armature €“ Our pro-level armatures feature our pattern hand-wound team winds with race specific wire sizes developed for today €™s high-output 3800NiMH and 4200NiMH batteries. All armatures are soldered using our high-tech solder and then are epoxy coated with the latest state-of-the-art epoxy resin. All armatures are then pro-spec precision balanced and the commutator is diamond trued. All armatures are stamped with wind.


• Comm Ring €“ All alum 2 armatures, 4 turn through 10 turn (singles & doubles) feature our Comm Ring commutator heat sink. Under normal racing conditions, the commutator area of low turn armatures is subjected to extreme heat and high centrifugal force stress, especially when using 3800NiMH and 4200NiMH batteries. The Comm Ring helps reduce the heat around the commutator area, as well as strengthens this area, preserving the integrity of the commutator, wire, and solder under these stresses.


• Silver Plated Copper Brush Tubes €“ Produce maximum current flow, while their special keyed design keeps the brushes perfectly aligned with the comm at all times. The brush tubes are also set closer to the comm which helps reduce brush bouncing and arcing. This brush tube design also incorporates a unique cap system allowing for easy access to the brushes and springs.


• Round Spring System €“ With the round springs placed directly behind the brush tube cap and centered over the brushes, this design insures perfect brush pressure efficiency.


• CP Can Technology €“ The 1.4mm thick can features high-power FB9 wet magnets. The can also features 8 vent slots and black oxide finish for maximum cooling efficiency.


• Onboard Surface Mount Capacitors €“ Help eliminate unwanted radio interference caused by electric motors.


• Team Motor Setups €“ Every Fantom alum 2 motor is built and tuned to our team specs. Every motor is built with the correct springs & brushes for the most common application of each wind.


• High Performance Brushes €“ Two different brushes are available to maximize performance in any racing situation. The A2-526 compound (p/n FAN52526) is specifically designed for all 4 cell racing applications. The A2-527 high-power silver compound (p/n FAN52527) is designed for all on-road and off-road racing applications.


• High Performance Springs - Four spring tensions are available for increased tuning capabilities in any racing situation. We offer Copper/Soft tension (p/n FAN51500) recommended for 1:12 racing applications, Gold/Medium tension (p/n FAN51501) recommended for off-road racing applications, Silver/Heavy tension (p/n FAN51502) recommended for on-road racing applications, and Black/X-Heavy tension (p/n FAN52503) recommended for oval racing applications and some low turn on-road racing applications.

alum 2

SPECIFICATIONS:

• Armature Type: 5mm high-torque web (standard Sagami type as used by CP, Orion, Reedy, etc. )


• Commutator Type: standard 7.5mm


• Brushes: A2-526 4 cell compound (p/n FAN52526)


• Springs: silver/heavy tension (p/n FAN51502)


• Dual Precision Ball-Bearings


• Adjustable Timing


• Rebuildable


• Comm Ring: Yes

MOST COMMON APPLICATION(S): 4 Cell Touring