Exotek EXO2363
$39.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.RC10 Hd Rear Hubs Adjustable 7075 for Use with M3 Ball Studs
Compatible with the RC10 Classic buggy series including the RC10T, RC10 4wd etc.
The heavy duty, precision machined 7075 alloy rear hub set. Precise stock bearing fit is achieved thanks to the re-machined bearing pockets in the hubs (the bearings do not touch any anodizing).
Designed with adjustable roll center mounts and camber gain using m3 washers with the angled ball stud mount, you can make adjustment to the suspension geometry that are not possible with the stock hubs.
These hubs also have high and low roll center mounting positions of the lower hinge pin along with included m3 set screws to pin the hinge pins.
NOTE- Hubs requires the the use of metric ball studs such as Associated #ASC91047. Do not use the weaker stock 4/40 ball studs!
TIP- Use with Associated RC10 4WD ball cups and turnbuckles #ASC6535 and ASC6547.
The heavy duty, precision machined 7075 alloy rear hub set. Precise stock bearing fit is achieved thanks to the re-machined bearing pockets in the hubs (the bearings do not touch any anodizing).
Designed with adjustable roll center mounts and camber gain using m3 washers with the angled ball stud mount, you can make adjustment to the suspension geometry that are not possible with the stock hubs.
These hubs also have high and low roll center mounting positions of the lower hinge pin along with included m3 set screws to pin the hinge pins.
NOTE- Hubs requires the the use of metric ball studs such as Associated #ASC91047. Do not use the weaker stock 4/40 ball studs!
TIP- Use with Associated RC10 4WD ball cups and turnbuckles #ASC6535 and ASC6547.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov