Exotek EXO2126
$124.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Cb6.4 Carpet Chassis Conversion Set for B6.4 7075 Chassis
As indoor tracks transition to high grip carpet you need more specialized equipment to take advantage of the super high grip conditions.
Exotek Racing brings to you the next evolution of carpet chassis that has been quietly dominating a few East Coast tracks. This chassis is optimized for maximum corner speed with the battery forward weight bias and super low center of gravity design.
And because all carpet tracks are not the same, the battery position is modular to allow for max forward to mid forward battery weight positioning. The inline positioning also can be easily moved forward or back thanks to the adjustable locking LiPo slider system.
The LiPo hold also doubles as a secure alum fan mount, positioning the fan for maximum flow through the motor.
In addition, the 4mm thick carbon chassis brace doubles as the LiPo strap for secure shorty pack holding (add foam spacers if using an LCG pack).
- 1.5mm thick carbon side rails to reduce overall weight.
- Heavy duty 7075 alum servo mount accepts low profile or standard servos.
- Carbon battery hold rails.
Required, not included:
AE B6.4 (not for the B6.3)
Use optional Lexan sections and hook and loop tape for body holding (m2 hardware is included).
For experienced hobbyists only.
A 30mm wide ESC is recommended for the inline battery position shown.
Exotek Racing brings to you the next evolution of carpet chassis that has been quietly dominating a few East Coast tracks. This chassis is optimized for maximum corner speed with the battery forward weight bias and super low center of gravity design.
And because all carpet tracks are not the same, the battery position is modular to allow for max forward to mid forward battery weight positioning. The inline positioning also can be easily moved forward or back thanks to the adjustable locking LiPo slider system.
The LiPo hold also doubles as a secure alum fan mount, positioning the fan for maximum flow through the motor.
In addition, the 4mm thick carbon chassis brace doubles as the LiPo strap for secure shorty pack holding (add foam spacers if using an LCG pack).
YOU WILL RECEIVE:
- 3mm thick heavy duty main chassis, super narrow profile for reduced dragging on the ground with slotted mid section for motor cooling. - 1.5mm thick carbon side rails to reduce overall weight.
- Heavy duty 7075 alum servo mount accepts low profile or standard servos.
- Carbon battery hold rails.
Required, not included:
AE B6.4 (not for the B6.3)
Use optional Lexan sections and hook and loop tape for body holding (m2 hardware is included).
For experienced hobbyists only.
A 30mm wide ESC is recommended for the inline battery position shown.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov