Exotek EXO2017
$22.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Steel Top Shaft Heavy Duty Compatible with Slash for Mk2 and
Not for the Magnum 272 Gearbox.
Heavy duty steel top shaft replacement for the 2WD Slash based drag cars for use with DR10 slipper sets or Exotek MK #2012 #2015 slipper sets or Exotek #1942 slipper eliminator.
1 piece no-pin constructions, for maximum reliability but still only 12.5gr ea.
Not compatible with the stock Slash slipper.
To use the DR10 slipper you will need;
1x Team Associated Octalock 48P Spur Gear
1x ASC7485
1x Exotek #2012
1x ASC9739 or similar
1x ASC91423 or similar
1x M4 lock nut
Use this for slipper tightening instructions- https: //img2.associatedelectrics. com/pdf/cars and trucks/DR10/RTR/70025-70026 DR10-manual. pdf
To use the Exotek Slipper you will need;
1x Team Associated Octalock 48P Spur Gear
1x Exotek #2009 or #2015
1x Exotek #2012
1x ASC9739 or similar
1x ASC91423 or similar
1x M4 lock nut
Use this for slipper tightening instructions- https: //img2.associatedelectrics. com/pdf/cars and trucks/DR10/RTR/70025-70026 DR10-manual. pdf
To use the DR10 slipper eliminator you will need;
1x Exotek #1942
1x Kimbrough or Exotek Flite 48pitch spur gears.
1x M4 locknut
Compatible with the 2WD Slash stock gear box, Proline Pro transmission or RPM Slash Case.
NOTE- you must use gear grease (tacky) to help protect the idler gear from wearing out.
Heavy duty steel top shaft replacement for the 2WD Slash based drag cars for use with DR10 slipper sets or Exotek MK #2012 #2015 slipper sets or Exotek #1942 slipper eliminator.
1 piece no-pin constructions, for maximum reliability but still only 12.5gr ea.
Not compatible with the stock Slash slipper.
To use the DR10 slipper you will need;
1x Team Associated Octalock 48P Spur Gear
1x ASC7485
1x Exotek #2012
1x ASC9739 or similar
1x ASC91423 or similar
1x M4 lock nut
Use this for slipper tightening instructions- https: //img2.associatedelectrics. com/pdf/cars and trucks/DR10/RTR/70025-70026 DR10-manual. pdf
To use the Exotek Slipper you will need;
1x Team Associated Octalock 48P Spur Gear
1x Exotek #2009 or #2015
1x Exotek #2012
1x ASC9739 or similar
1x ASC91423 or similar
1x M4 lock nut
Use this for slipper tightening instructions- https: //img2.associatedelectrics. com/pdf/cars and trucks/DR10/RTR/70025-70026 DR10-manual. pdf
To use the DR10 slipper eliminator you will need;
1x Exotek #1942
1x Kimbrough or Exotek Flite 48pitch spur gears.
1x M4 locknut
Compatible with the 2WD Slash stock gear box, Proline Pro transmission or RPM Slash Case.
NOTE- you must use gear grease (tacky) to help protect the idler gear from wearing out.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov