Hot Racing MH404F02
$33.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Red Monster Blower Heat Sink Fan W/ Deans Conn - 1/8 Motors
This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the Axial 1/8 Yeti XL, or any custom project
- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
- One (1) Deans-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH404F06 for equivalent system with a TRA-style connector
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- Replacement Hot Racing 40x40x10.3mm fan is MH404F
description revised by: SN February 18, 2019
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan- One (1) Deans-style adapter connector
REQUIREMENTS:
- Installation- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH404F06 for equivalent system with a TRA-style connector
SPECIFICATIONS:
- Fan Size: 40x40x10.3mm- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- For equivalent heat sink and fan, anodized blue and with a TRA-style connector, see Hot Racing ERV404F06- Replacement Hot Racing 40x40x10.3mm fan is MH404F
description revised by: SN February 18, 2019
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov