Hot Racing EEC2000L01
$68.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Nitro to Electric Conversion Transmission .21+
Hot Racing electric motor conversion kit was designed around a .21 (or any big block) class nitro engine
- Faster acceleration
- Light weight for higher top speed
- Predictable performance
- Highly versatile system for high RPM or high torque low RPM applications
- Full ball bearing
- All hardened steel gear
- One (1) .21 class electric motor adapter
- 1/8 brushless Motor, ESC and battery
- Pinon gear (32 pitch) for electric motor and conversion (32 or 24 pitch). The adapter provides a 5mm shaft to attach a pinion where the clutch bell would be on your nitro engine. Choose a pinion to match your vehicle spur gear.
- Simple hand tools for installation
- Disable the ESC reverse
- Lubricants for steel gear
- Removable thread-locking adhesive for screws threading into metal
- Transmission Ratio: 1.6
- Input gear 32P, 17T
- Output gear 32P, 27T
- Counter gear 32P, 25T
- Output shaft diameter: 5mm
- Weight: 155g
- Overall length: 122mm
- Overall height: 67.5mm
- Original engine mount pattern: 37x21mm (1.45x.83in), M3.5 max screws
- Center of engine mount bolt pattern to end of shaft: 74mm
- Replacement clutch axle is Hot Racing EEC2000A
- Replacement bearings are Hot Racing EEC2000B
- Replacement counter shaft is Hot Racing EEC2000GS
- Replacement gears are Hot Racing EEC2000AG
description revised by: SN June 18, 2018
FEATURES:
- Faster acceleration
- Light weight for higher top speed
- Predictable performance
- Highly versatile system for high RPM or high torque low RPM applications
- Full ball bearing
- All hardened steel gear
YOU WILL RECEIVE:
- One (1) .21 class electric motor adapter
REQUIREMENTS:
- 1/8 brushless Motor, ESC and battery
- Pinon gear (32 pitch) for electric motor and conversion (32 or 24 pitch). The adapter provides a 5mm shaft to attach a pinion where the clutch bell would be on your nitro engine. Choose a pinion to match your vehicle spur gear.
- Simple hand tools for installation
- Disable the ESC reverse
- Lubricants for steel gear
- Removable thread-locking adhesive for screws threading into metal
SPECIFICATIONS:
- Transmission Ratio: 1.6
- Input gear 32P, 17T
- Output gear 32P, 27T
- Counter gear 32P, 25T
- Output shaft diameter: 5mm
- Weight: 155g
- Overall length: 122mm
- Overall height: 67.5mm
- Original engine mount pattern: 37x21mm (1.45x.83in), M3.5 max screws
- Center of engine mount bolt pattern to end of shaft: 74mm
COMMENTS:
- Replacement clutch axle is Hot Racing EEC2000A
- Replacement bearings are Hot Racing EEC2000B
- Replacement counter shaft is Hot Racing EEC2000GS
- Replacement gears are Hot Racing EEC2000AG
description revised by: SN June 18, 2018
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov