Duratrax DTXP4201

This is the DuraTrax Onyx 200 AC/DC Sport Peak Charger with LEDs. Designed for sport electric car or boat modelers that use NiCd or NiMH batteries.

Charges 4-7 cell NiCd or NiMH (4.8 - 8.4V) cells with a capacity range of 750 - 7500mAh
Compatible with AAA size cells up to the highest capacity sub-C cells as well as 4-5 cell nitro receiver packs
AC and DC input capabilities make it perfect for indoor or outdoor use
Pushbutton control and five LED indicators (4 Red, 1 Green), audible tones and built-in leads for simplicity and convenience
Precise peak detection algorithm with automatic TRICKLE charge fills packs completely for optimum voltage and run time
Built-in jack included for charging 4 or 5 cell NiCd or NiMH receiver batteries for nitro models, or for monito-ring charge voltage of battery connected to the main output with a separate digital voltmeter
Audible tones and multiple LEDs for simple setup and use
Lightweight switching AC power supply delivers up to 5 amps of charge current
Solid state reverse polarity and current overload safety devices ensure trouble-free operation and long duration
FIVE YEAR warranty (U.S.A. and Canada only)

DuraTrax Onyx 200 AC/DC Sport Peak Charger, DC power lead with alligator clips

AC Input: 110V AC 60Hz
DC Input: 11-15V DC, built-in lead with alligator clips
Battery Types: 4-7 NiCd or NiMH cells (4.8-8.4V)
Battery Capacity Range: 750-7500mAh
Fast Charge Current: 1.5A, 3.0A, 5.0A linear (40W max.)
Fast Charge Termination: Peak detection
Fast Charge Safety Timer: 90 minutes
Peak Sensitivity: 8mV
Auto TRICKLE Current: 1/20 fast charge setting
Controls: Pushbutton, slide switch
LED Indicators: 4 Red, 1 Green
Audible Indicator: Indicate start, stop, errors
*Output Connections: Built-in lead with Kyosho type connectorBuilt-in jack for charging 4 or 5 cell Rx packs
*Standard to Deans Ultra Male Adapter available separately (GPMM3131)
*Standard to Vendetta, MiniQuake, RS4 Battery available separately (DTXC2210)
Protective Devices: Solid-state reverse polarity and current overload
Case Size: 5.74 x 4.60 x 1.61" (146 x 117 x 41mm)
Weight: 17oz (484g)