Duratrax DTXP4196
$54.99

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Onyx 150 AC/DC LiPo Balancing Charger
This is the Duratrax Onyx 150 AC/DC Balancing LiPo Charger.
***When charging LiPo batteries, the Main Charge Lead and the Balance Lead****
***********MUST be connected in order for the charger to operate.*************
***********If only one connection is made, the charger will remain************
****************in Standby mode until both leads are connected.****************
FEATURES:
Charges 1-3 LiPo cells onlyCompact switching power supply and AC/DC power cords
Switch selectable charge rates for 1-3S LiPo power and radio packs
Sound cues for easy setup and tri-color LED constantly shows charge status
Star Plug male connector, and universal radio jack for 1-3S LiPo receiver packs
Ninety minute safety timer
Built-in cooling fan
Reverse polarity and current overload circuitry
FIVE YEAR warranty through Hobby Services (U.S.A. and Canada only) beginning at date of purchase
YOU WILL RECEIVE:
Duratrax Onyx 150 AC/DC LiPo Charger with Duratrax 2S Balancing Plug with 3S Adapter, Star Plug on Output, and Instruction ManualSPECIFICATIONS:
AC Input: 110V 60Hz, 50WDC Input: 11-15V, 50W
Battery Type: 1-3 LiPo cells only (3.7-11.1V)
Battery Capacity Range: 750-7500mAh
Fast Charge Current: 1.5A, 3.0A, and 5.0A
Fast Charge Termination: cc/cv (based on 3.7V cell)
Fast Charge Safety Timer: 90 minutes
Output Connections: Attached lead with Star Plug male connector, and universal radio jack (for 1-3S LiPo receiver packs)
Input Connections: Attached AC lead and detachable DC lead with alligator clips
Balancing Connector: Duratrax 3S with 2S adapter
Balancing Accuracy: +/-5mV per cell
Protective Devices: 90 minute safety timer, built-in cooling fan, reverse polarity, and current overload circuitry
DIMENSIONS:
5.3 x 5.0 x 1.9" (133 x 127 x 48mm)Weight: 12.6oz (356g)
COMMENTS:
All errors are displayed by an orange LED. See the error code reference chart located in the instruction manual.Once the Onyx 150 has finished charging, the red LED will flash repeatedly in conjunction with audible tones. After the flashes and tones stop, the red LED will continue to flash once for each cell connected.