Duratrax DTXP4000

$39.99
Duratrax logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
Piranha Ac/Dc Peak Power Charger
Duratrax DTXP4000 - Piranha Ac/Dc Peak Power Charger
This is the Duratrax Piranha AC/DC Peak Power Detection Charger. *** Five-Year Warranty ***
FEATURES:
Peak Charges 6- and 7-cell NiCd Battery Packs **NOT FOR NiMH** 6- and 7-Cell Selector Switch Red LED, Constant-ON During Fast Charge, Flashes During TRICKLE Charge. Red Push-To-Start Button 1A Fuse-Protected AC Wall Outlet Cord Approx. 3.5 Feet Long Red and Black DC Cord Approx. 2 Feet Long w/Large Alligator Clips About 18" Long Charge Cord w/Standard Type (Tamiya) Connector Also Includes Adapter for Old Kyosho Unique Yellow and Black Aluminum Face Plate w/Red Pin Stripes and Composite Black Plastic Base. Vented Faceplate and Case for Adequate Heat Dissipation Safety Feature Stops Fast Charge after 45 Minutes To Prevent Accidental Overcharge. Automatically Switches To TRICKLE When Peak Charge Is Reached Maximum Per Cell Voltage of 1.75V - Automatically Stops Fast Charge When This Condition Is Met So To Not Damage Battery From Overcharge Reverse Polarity Protection On DC Input Short Circuit and Reverse Polarity Protection On Output - Charger Can Detect Such Problems and Will Automatically Disable Charge Functions 5 Seconds After Detecting Problem - LED Will Go OFF Indicating Termination
YOU WILL RECEIVE:
One Charger with AC/DC Cords and Standard Battery Charge Cord One Extra 1A Fuse One Battery Charge Adapter (for Old Kyosho Connector Battery) One Separate "Addendum" Sheet (see COMMENTS)
SPECIFICATIONS:
Input Power: 110V AC (US Standard) or 12V DC Peak: Yes Cells: 6-7 Charge Rate: Fast 4.5A Trickle Rate: 50-300mAh Voltmeter: No (No Jacks Either) Ampmeter: No (No Jacks Either) Discharge: No Current Adjust: No Connector: Standard (Tamiya) & Adapter for Old Kyosho Fuse: 1A (Glass Cylinder Type) Timer: Safety Feature Stops Fast Charge In About 45 mins. Size: Length: 6-1/2" Width: 4-3/4" Height: 3"
REQUIREMENTS:
Power Source Such As 110V AC Household Wall Outlet OR 12V DC Power With At Least 6A Such As HCAP0250 Power Supply OR HCAP0800 TorqMaster Battery.
COMMENTS:
The "addendum" sheet says that the charge indicator LED may go out as the battery approaches full charge if used with a bad battery or battery with abnormally high voltage. When Fast charge is done the LED flashes, indicating the TRICKLE charge has begun. To Determine The Condition Of The Battery, Run It In The Model, Then Compare The Run Time To A Known Good Battery. The Instructions For The Charger Are Printed Directly On The Box, There Is No Separate Instruction Sheet. Fuse Replacement, Use Part Number HSP29001 At Hobby Services. JAL 3/24/99 ir/jl updt jxs 8/09/05 &
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov