Duratrax DTXM1300

This is the DE10 brushless Programmble Electronic Speed Control from DuraTrax.
Ideal for many 1/10 scale applications, regardless of motor type-
sensored and sensorless brushless, and brushed motors
Adjustable parameters such as Power Curve, Timing Advance, Start
Power, ABS, Auto Brake and many more allow this ESC to be used in
on and off-road cars and trucks, as well as crawlers
6 volt, 3 amp linear BEC allows the use of high-torque digital
steering servos
Compatible with the DuraTrax Digital Programmer, DTXC1350 (not
included), that allows easy adjustment of parameters, fine tuning,
and allows user to view post-run data downloaded from the ESC
Multi-color LEDs and audible tones for easy manual set-up
Three 13 gauge, silicone insulated wire motor leads
180 day Limited Warranty beginning at date of purchase, valid in the
USA and Canada only
Duratrax DE10 brushless Programmble Electronic Speed Control with
Motor and Battery Wires, TRA Male and Dean's Ultra Battery
Connectors, Universal Receiver Connector, and Instruction Sheet
Installing in vehicle and connecting to battery, motor and receiver
Motor Types: Sensored and Sensorless brushless down to 5.5 Turns
Brushed Motors down to 4 turns (6 turns w/reverse
activated)
Input Voltage: 4-6 Cell NiCd nimh
2S LiPo, LiFe
Operating Frequencies: 32kHz sensorless brushless
8kHz sensored brushless
2kHz brushed
Direction: Forward, Brake, Reverse
BEC: 6.0V, 3.0A linear
Manual Setup: Pushbutton with LEDs and Audible Motor Tones
Programmable Options: 19 Features
(can set manually, or with optional DuraTrax Digital Programmer,
DTXM1350)
On-Resistance: 0.0013 Ohms per phase, brushless
0.0002 Ohms brushed (0.001 with reverse activated)
(at 25C transistor temperature)
Rated Current: 80A Continuous (160A for 10 seconds)
(at 25C transistor temperature)
Super Prog. System: Yes
Protections: Low Voltage Cutoff, Over-Current, Over-Temperature at
248F (120C) measured at semiconductor junction
Battery Connections: 13AWG, TRA Male Connector (Dean's Ultra also
included) silicon insulation
Receiver Connector: Universal
34 x 38 x 25.5mm (1.3 x 1.5 x 1.0")
Weight: 83g (2.9oz)