Duratrax DTXM1075
$64.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Intellispeed 8t Racing Reverse Esc
Team DuraTrax I-Speed Modified Forward and Reverse Electronic Speed Control with a Futaba J connector.
FOR HOT MODIFIED MOTORS DOWN TO 8 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable reverse-delay, reverse-lockout, and traction control.
Forward and Reverse and ABS Braking
Great for Racer Level
Easy Push button Setup
Thermal Protected
More Efficient Than Mechanical Speed Controls
Reverse Lockout
LED (Forward and Red Full Speed, Red and Green Reverse)
Pre-Installed Futaba J Connector
Pre-Installed Bullet Type Connectors For Motor
Standard (Tamiya Type) Connector For Battery Pack
ON/OFF Switch
BEC Equipped
Connector and Bullet Motor Connectors.
Three .1 Type Capacitors
One Instruction Sheet
ON-Resistance: 0.002
Traction Control: 0.09, 0.16, or 0.27
Reverse Delay: 0.3 or 0.8
Maximum Continuous Current: 420A
Maximum Peak Current: 1410A (confirmed by R & D)
Number of Cells: 6-7
Size with heat sinks: 1.48"L x 1.34"W x .57"H
Weight with heat sink: 2.54 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 8 Turn Hot Modified
Wires: 14 gauge
Soldering Capacitors Onto Motor
Installing onto Electric Vehicle
6 or 7 Cell Battery
Motor (8 Turn or Above)
description revised by: DB February 25, 2013
FOR HOT MODIFIED MOTORS DOWN TO 8 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable reverse-delay, reverse-lockout, and traction control.
FEATURES:
Great for Racer Level
Easy Push button Setup
Thermal Protected
More Efficient Than Mechanical Speed Controls
Reverse Lockout
LED (Forward and Red Full Speed, Red and Green Reverse)
Pre-Installed Futaba J Connector
Pre-Installed Bullet Type Connectors For Motor
Standard (Tamiya Type) Connector For Battery Pack
ON/OFF Switch
BEC Equipped
YOU WILL RECEIVE:
One I-Speed Forward/Reverse Electronic Speed Control with Futaba J Connector and Bullet Motor Connectors.
Three .1 Type Capacitors
One Instruction Sheet
SPECIFICATIONS:
Traction Control: 0.09, 0.16, or 0.27
Reverse Delay: 0.3 or 0.8
Maximum Continuous Current: 420A
Maximum Peak Current: 1410A (confirmed by R & D)
Number of Cells: 6-7
Size with heat sinks: 1.48"L x 1.34"W x .57"H
Weight with heat sink: 2.54 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 8 Turn Hot Modified
Wires: 14 gauge
REQUIREMENTS:
Installing onto Electric Vehicle
6 or 7 Cell Battery
Motor (8 Turn or Above)
description revised by: DB February 25, 2013
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov