Duratrax DTXM1065

This is the Team DuraTrax I-Speed Mild Modified Forward and Reverse Electronic Speed Control with a Futaba J connector. FOR MILD MODIFIED MOTORS DOWN TO 16 TURNS ONLY! ABS Braking for better control in and out of corners, and adjustable reverse-delay, reverse-lockout, and traction control. *** 120 Day Limited Warranty *** Forward and Reverse and ABS Braking MOSFET Equipped Thermal Protected More Efficient Than Mechanical Speed Controls Reverse Lockout LED ( Forward and Red Full Speed,Red and Green Reverse) Pre-Installed Futaba J Connector Pre-Installed Bullet Type Connectors For Motor Standard (Tamiya Type) Connector For Battery Pack ON/OFF Switch BEC Equipped. One I-Speed Forward/Reverse Electronic Speed Control with Futaba J Connector and Bullet Motor Connectors. Three .1 Type Capacitors One Instruction Sheet ON-Resistance: 0.0046 Traction Control: 0.0, 0.1, or 0.2 Reverse Delay: 0.3, or 0.8 Maximun Continuous Current: 192A Maximum Peak Current: 660A Number of Cells: 6-7 Size with Heatsinks: 1.48"L x 1.34"W x 0.57"H Weight with Heatsink: 2.19 ounces Connector: Motor: bullet Battery: standard (Tamiya) Motor: 16 Turn Mild Modified Wires: 14 gauge Installing .1 Type Capacitors Onto Motor with Solder Installing into Electric Vehicle 6 or 7 Cell Battery Motor (16 Turn or Above) kh2-21-02 Updated JPG 4/10/02 ir/kh &