Duratrax DTXG0225

This is the DTX .18 Engine with Rotary Carburetor and Recoil. It has the same mounting and muffler dimensions as the OS Max .12CV 2 Year Warranty ABN construction, Aluminum piston with Brass Nickel-plated cylinder liner. Rotary carb Recoil starter Ball bearing-supported crankshaft Heavy duty con rod Side exhaust DuraTrax Silver Sport glow plug, available separately (DTXG3001) Natural aluminum (powder coat) 7-fin cylinder head One assembled DTX .18 engine with Rotary Carb and Recoil Starter One set of instructions with parts list Muffler (exhaust system) depending on vehicle Air filter Fuel filter Starting equipment Fuel: 5% - 20% nitromethane content Displacement: .18 cu in (3cc) Weight: 8.64oz (245g) Bore: 16.6mm Stroke: 13.6mm Power Output: n/a Practical RPM: n/a Ports: Three (2-intake, 1-boost, 1-exhaust) Crankshaft Thread: 5mm x 14mm On-Center Mounting Holes, Front to Rear: .43" (11mm) On-Center Mounting Holes, Side to Side: 1.24" (31.4mm) On-Center Exhaust Mounting Holes: 1.08" (27.5mm) Back of engine to front of drive washer: 2.23" (56mm) Excluding Recoil Height: 3.25" (83.7mm) High Speed needle: 2½ turns OUT from closed position Low Speed needle: Screw IN until flush with outside of carb body, then screw it in ½ turn. tjt 5/5/2003 ir/jxs ABN updated cmc 11/19/04 updt jxs 6/22/05 &