Chassis: 0.08 (2mm) thick anodized aluminum vertical plates, gun
metal gray in color
Drive: Four wheel with a solid spool to lock the axles to ensure
maximum traction, hardened steel axles and drive shaft
Radio: Tactic 2-channel pistol grip with two TSX-200 standard servos
Electronic Speed Control: 16.8V dual motor, dual battery capability
Motors: Two 380 size with low RPM for climbing
Pinion Gears: 11 tooth
Main Gears: 45 tooth
Shocks: Oil filled, adjustable, aluminum caps
Body: Prepainted and trimmed scale rock crawler body
Tires: 4.25 (108mm) diameter, 2 (51mm) wide extra soft compound
for high traction, low rebound foam inserts
Wheels: 2.3 (59mm) diameter, 1.6 (40mm) wide, gray in color with
12mm hex mounts that are compatible with 1/10 scale wheels
Steering: Four wheel with servos equipped with servo savers mounted
on front and rear axles
Bumpers: Front and rear plastic
Camber and Caster: Non-adjustable

YOU WILL RECEIVE:

Fully assembled 1/14 scale Cliff Climber Rock Crawler, 2-ch radio
ESC, body, two motors, decals and illustrated instruction manual

REQUIREMENTS:

AA Batteries: 8 for transmitter, SANP3501
Batteries: Two 6-cell nimh 2/3A batteries
Battery Charger: For nimh batteries, DTXP4240

SPECIFICATIONS:

Vehicle-
length: 14.2 (360mm)
width: 9 (230mm)
height: 7.9 (200mm)
Wheelbase: 9.5 (240mm)
Ground Clearance: 3.5 (90mm)
Body-
length: 11.4 (289mm)
width: 5.7 (146mm)
height: 3.9 (100mm)

COMMENTS:

The Cliff Climber is available in the following body colors and
radio channels;
Green/Tan ch A1 DTXD18A1
Blue/Gray ch A2 DTXD18A2
Red/Gray ch A3 DTXD18A3
Orange/Gray ch A4 DTXD18A4
Brown/Tan ch A5 DTXD18A5
Blue/Cyan ch A6 DTXD18A6
Also available in an Almost Ready to Run version requiring radio,
ESC, wire harness and paint, DTXC0018.
To upgrade to Ball Bearings, order DTXC1099.
jxs 5/02/08
ir/jxs

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov