Duratrax DTXC1864

$42.99
Duratrax logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
discontinued Lipo Onyx 2s 7.4v 5000mah 25c Hard Case Deans Plug
Duratrax DTXC1864 - discontinued Lipo Onyx 2s 7.4v 5000mah 25c Hard Case Deans Plug

This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Dean's Ultra Connector.
FEATURES:
Ideal for 1/10 scale car applications
Prewired with Dean's Ultra Connector
YOU WILL RECEIVE:
7.4V 5000mAh 25C Hard Case LiPo Battery with Dean's Ultra Connector
REQUIREMENTS:
Balancer and LiPo compatible charger or LiPo charger with built-in
balancer such as the Onyx 235, DTXP4235
SPECIFICATIONS:
Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Discharge Rating: 25C continuous
DIMENSIONS:
1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Dean's Ultra
Balancing Connector: ElectriFly
Watt Hours: 37Wh
COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
jxs 06/30/11
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov