Duratrax DTXC1860

This is the DuraTrax LiPo 7.4V 1800mAh 30C Hard Case Mini Battery Pack
with 3.5mm Bullets.
For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
1/16 to 1/18 scale vehicles
DuraTrax LiPo 7.4V 1800mAh 30C Hard Case Battery Pack with 3.5 male
bullets to make battery lead
Balancer such as the Team Checkpoint Balancer TCPP9150, and 2S 3.5mm
Adapter, TCPP9152
Capacity: 1800mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 30C
Maximum Recommended Charge Current: 1C (1.8 amps)
Center Charge Terminal: 2mm Female Bullet
Discharge Terminals: 3.5mm Female Bullets
Pack 3.5 x 1.3 x 0.7" (88 x 32 x 19mm)
Weight: 3.4oz (96g)
Optional Battery Leads;
Deans U Plug, DTXC2216
TRA Plug, DTXC2217
Mini Plug, DTXC2218
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm
jxs 5/26/09
ir/jxs
&