Duratrax DTXC1855

This is the DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Mini Battery Pack with Mini Plug. For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other 1/16 to 1/18 scale vehicles that use batteries with mini plugs DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Pack with Mini Plug Balancer such as the Team Checkpoint Balancer TCPP9150, and 2S Adapter XH Plug, TCPP9155 Capacity: 1600mAh Number of Cells in Series: 2 Rated Voltage: 7.4V Continuous Discharge Rate: 20C Maximum Recommended Charge Current: 1C (1.6 amps) Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug Pack 3.3 x 1.2 x 0.7" (85 x 31 x 17mm) Weight: 3oz (85g) all plugs and wires are included in weights ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.2V per cell NEVER Charge at currents greater than 1C NEVER Charge through the "To ESC or "DISCHARGE" lead NEVER Trickle Charge NEVER allow to Discharge below 2.5V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children All weights include wire leads and plugs All weights +/- 1g All measurements +/- 1mm jxs 5/26/09 ir/jxs &