Duratrax DTXC1831

$19.99
Duratrax logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
Lipo Onyx 3s 11.1v 1300mah 25c Soft Case Tra
Duratrax DTXC1831 - Lipo Onyx 3s 11.1v 1300mah 25c Soft Case Tra
This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery with the TRA Plug.
FEATURES:
Ideal for 1/16 scale car applications
Prewired with TRA high current connector
YOU WILL RECEIVE:
11.1V 1300mAh 25C Soft Case LiPo Battery with TRA High Current
Connector
REQUIREMENTS:
Balancer and LiPo compatible charger or LiPo charger with built-in balancer such as the Onyx 235, DTXP4235
SPECIFICATIONS:
Voltage Rating: 11.1V
Rated Capacity: 1300mAh
Discharge Rating: 25C continuous
DIMENSIONS:
(35 x 21 x 69mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), TRA Plug
Balancing Connector: ElectriFly
Watt Hours: 14Wh
COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov