Dromida DIDC1134
$22.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued LiPo 2S 7.4V 1600mAh 20C BX/MT/SC4.18
Dromida brand optional 7.4V 1600mAh 20C LiPo Battery
for the Dromida MT, BX and SC Vehicles.
FEATURES:
For use when converting Dromida vehicles to brushless power, see
COMMENTS below
YOU WILL RECEIVE:
7.4V 1600mAh 20C LiPo Battery
Instruction Sheet
REQUIREMENTS:
LiPo compatible charger
LiPo charging bag
SPECIFICATIONS:
Capacity: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 0.75 (19mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5 (90mm) long wire w/Mini Plug
Pack Dimensions: 3.3 x 1.2 x 0.7 (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights
COMMENTS
**Do not use to power Dromida vehicles with stock brushed power
systems. The stock ESC is not compatible with LiPo batteries.**
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 03/19/14
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
for the Dromida MT, BX and SC Vehicles.
FEATURES:
For use when converting Dromida vehicles to brushless power, see
COMMENTS below
YOU WILL RECEIVE:
7.4V 1600mAh 20C LiPo Battery
Instruction Sheet
REQUIREMENTS:
LiPo compatible charger
LiPo charging bag
SPECIFICATIONS:
Capacity: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 0.75 (19mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5 (90mm) long wire w/Mini Plug
Pack Dimensions: 3.3 x 1.2 x 0.7 (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights
COMMENTS
**Do not use to power Dromida vehicles with stock brushed power
systems. The stock ESC is not compatible with LiPo batteries.**
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 03/19/14
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov