Castle Creations CSE010-0094-08

This is the Castle Creations 1/10th SV2 Sidewinder Speed Control and CM36-7700 kV Brushless Motor 1/10 Scale Power System. For 1/10 buggy and truggy applications that weigh less than 5lbs 4.0mm motor connectors, on-off switch, and universal receiver plug Castle Link compatible Low voltage cut-off Dead band set-up to adjust throttle width of the controller Drag break to set the amount of brake applied at neutral Punch/Traction control to set how fast the throttle position within the ESC can be changed over time Reverse adjustment Brake adjustment Brake/Reverse type can be set for reverse Lockout, Forward/Brake only, or Forward/Brake/Reverse set-up. Castle Creations Sidewinder Electronic Speed Control CM36-7700 kV Brushless Motor Decal Sheet Aftermarket pinion and spur gears depending on application. Stock gearing should NOT be used with this power system. Contact Castle Creations for further information Electronic Speed Control- Max Cells: 10 cell NiCd/NiMH, 3 cell LiPo Brake settings: 25%, 50%(default), and 75% power Reverse Amount: 25%, 50%(default), and 75% Power Drag Brake: Off(default), 10%, 20%, 30%, and 40% Dead Brake settings: .1500ms, .1000ms(default), .0750ms, .0500ms and .0250ms Cutoff Voltage: None, Auto LiPo 3.0V per cell (default), 3.5V, 4.6V and 9.0V and 12.0V CM 36-7700kV Input Voltage: 6-8 cell NiCd/NiMH max OR 2S LiPo max Size 1.41" (35.5mm) diameter, 1.99" (50mm) length Shaft Diameter: 1/8" (3.2mm) Connector Type: 3.5mm Bullet jxs 09/26/11 ir/jxs &