Castle Creations CSE010-0155-09
$274.95

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Mamba X 25.2v Wp Esc 1406-2280kv Sensored:Crawler
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC with the 1406 4-Pole 2280Kv Sensored brushless Motor.
ESC;
2S - 6S input voltage range
Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while
driving Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires
Motor;
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE uses motor's sensors to provide smooth starts, excellent
torque and low-speed drivability-once motor is turning it
transitions to sensorless mode
QUIETSENSE technology shields sensors from magnetic field noise
generated from the motor coils keeping motor and ESC in sync at all
times
ROAR standard sensor port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
assembly or rotor/shaft assembly
One year limited warranty through Castle Creations beginning at date
of purchase
1406-2280Kv Sensored brushless Crawler Motor
8.3" (210mm) length Sensor Wire for Sensored Operation
Castle Sensor Harness Adapter
Coupon for free Castle Link USB Adapter
Driver's Ed and Quick Start Guides
Castle Decal Sheet
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run
Motor, CSEC6900
Input Voltage Range: 2-4S LiPo
Kv: 2280
Max RPM: 100, 000
length: 1.9" (49.5mm)
diameter: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft length: 0.59" (15mm)
Shaft diameter: 1.8" (3.17mm)
Mounting Hole
Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge
wire
Sensor Wire length: 8.3" (210mm)
jxs 07/05/17
ir/jxs
FEATURES:
Ideal for low speed crawling or trail ruinning in vehicles weighing up to 9lbs (4.1kg) on 2s to 4s LiPos, can also be used in more aggressive setups such as rock racing and extended hill climbing on vehicles up to 5lbs (2.3kg) ESC;
2S - 6S input voltage range
Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while
driving Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires
Motor;
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE uses motor's sensors to provide smooth starts, excellent
torque and low-speed drivability-once motor is turning it
transitions to sensorless mode
QUIETSENSE technology shields sensors from magnetic field noise
generated from the motor coils keeping motor and ESC in sync at all
times
ROAR standard sensor port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
assembly or rotor/shaft assembly
One year limited warranty through Castle Creations beginning at date
of purchase
YOU WILL RECEIVE:
Mamba X Extreme 1/10 scale Electronic Speed Control 1406-2280Kv Sensored brushless Crawler Motor
8.3" (210mm) length Sensor Wire for Sensored Operation
Castle Sensor Harness Adapter
Coupon for free Castle Link USB Adapter
Driver's Ed and Quick Start Guides
Castle Decal Sheet
REQUIREMENTS:
Battery connectors to match selected batterySPECIFICATIONS:
ESC, CSEM9500: Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
DIMENSIONS:
2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm) Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run
Motor, CSEC6900
Input Voltage Range: 2-4S LiPo
Kv: 2280
Max RPM: 100, 000
length: 1.9" (49.5mm)
diameter: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft length: 0.59" (15mm)
Shaft diameter: 1.8" (3.17mm)
Mounting Hole
SPECIFICATIONS:
M3 @ 25mm Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge
wire
Sensor Wire length: 8.3" (210mm)
jxs 07/05/17
ir/jxs