Castle Creations CSE010-0164-06

This is the Castle Creations Sidewinder 4 Sensorless Electronic Speed Control and the 1410 3800Kv Sensored Brushless Motor with 5mm Shaft. Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs using a 2S LiPo, and 1/10 scale buggies and stadium trucks up to 4lbs using a 2-3S LiPo. Sidewinder 4 ESC; Recommended for 1/10 scale RC vehicles weighing up to 6.5lbs (2.9kg) Sensorless brushless and/or brushed motor compatibility Can be powered by a 2-3S LiPo, or 6-8 NiMH battery 5V fixed, 2A BEC (battery eliminator circuitry) Cryo-drive technology, a combination of software enhancements and precision fluid dynamics offers reduced operating temperatures in all applications Redesigned case for optimum airflow Compatible with the optional Castle Link USB programmer (not included order CSEM6300 Large high-rate 30mm cooling fan Waterproof in normal operation, see COMMENTS below; 1410 3800Kv Sensored Brushless Motor w/5mm Shaft; High-strength 180°C grade neodymium sintered magnets with high- strength wrap High-temperature, high purity copper windings High-performance 0.2mm steel lamination stacked stator Vibration dampening wave spring on shaft Rotor position sensor eliminates cogging and inconsistency during startup CNC machined 6061 T-6 aluminum endbells and motor can 13AWG high strand count silicone insulated wires with 4mm male bullet connectors Four pole configuration for maximum efficiency at high RPM ROAR standard sensor port and labeled connections Replaceable front end bell/bearing assembly and rotor/shaft assembly Sidewinder 4 ESC with two Receiver Wires with Standard Connectors 4mm Bullets for Motor Connection, On/Off Switch, Motor Wires 1410 3800Kv Sensored Brushless Motor, Sensor Wire and Instructions Battery Plug and Pinion Gear depending on application Sidewinder 4 ESC (CSEM5900); Input Voltage Range: 2S LiPo, 6-8 cell NiMH Kv: 7700 Max. RPM: 100,000 Max. Recommended Vehicle Weight: 4lbs (1814g) with battery RTR Length: 1.9" (49.5mm) Diameter: 1.4" (36mm) Weight with Wires: 6.9oz (197g) Shaft Diameter: 1/8" (3.17mm) Shaft Length: 0.59" (15mm) Mounting Hole M3 @ 25mm Connectors: 4mm Male Castle Bullet 1410 3800Kv Sensored Brushless Motor w/5mm Shaft (CSEC6600); Input Voltage Range: 2-3S LiPo Kv: 3800 Max. RPM: 100,000 Length: 2.1" (57mm) Diameter: 1.4" (36mm) Weight with Wires: 8.4oz (237g) Shaft Diameter: 0.197" (5mm) Shaft Length: 0.83" (21mm) Mounting Hole M3 @ 25mm Connectors: 4mm Male Castle Bullet Not intended for operation while submerged in liquid, fan is splash resistant but should be removed from the ESC before prolonged exposure to liquids. jxs 02/20/18 ir/jxs &